Page Contents
Details: 3D Printer Filament Sensor with 1M Cable,1.75mm PLA Filament Runout Sensor/Filament Break Detection Sensor,Suitable 1.75mm PLA Filament for Ender 3 PRO V2 S1/ CR-10S PRO CR10 V2 V3 3D Printer
Brand: Fiabgum
Advantages
- Products can be returned
- Make sure this fits by entering your model number.
- 【Function of Filament Detection Module】To detect Filament in 3D printer run-out,pause detection, it automatically stops the 3D Printer when the filament runs out.Optimize the inlet port/outlet port of the material detection module, to reduce the resistance of the feeding material.
- 【Economical and practical】very practical 3D Printer Accessories- filament detection sensor module, ideal accessories for 3D printers, make your printing work smooth and easy.
- 【Prolong product life】wear-resistant copper sleeves are added to the inlet and discharge port at the same time, which can effectively prolong the service life of the product.
- 【Wide range of application】suitable for all 1.7mm filaments, such as PLA,TPU, etc.; compatible with many 3D printer motherboards on the market (the motherboard can be used with ports, different motherboards, different firmware,The main board executes the pause command operation when the filament is run out.), compatible with Ender 3 CR10 and other machines.
Notice
- Is an online purchase
- Delivery may be delayed in some areas.
Buyer Guide 3D Printing Supplies
It’s always a good idea to have a firm understanding of each individual component, and go from there.- Filament, or “muck.” The filament is a plastic used in 3D printing. It’s usually available in different diameters and colors.
- Printer. There are different kinds of 3D printers, including desktop, industrial, and open-source models.
- Software. There are several different types of printing software, including slicers, slicer-creator, and hosts.
- Support Material. Support material is a support material used in 3D printing. There are usually 2 types: soluble support material and solid support material
- PLA (Polylactic acid): PLA filament is biodegradable, renewable, and compostable.
- ABS (Acrylonitrile butadiene styrene): ABS filament is stronger, tougher, and better than PLA.
How to choose 3D Printing Supplies
When shopping for 3D Printing supplies, there are several factors that you should keep in mind:Is the 3D printer compatible with your
computer? Some 3D printers require special software, while others require
their own proprietary software. Some printers work with only Mac computers,
while others work with only Windows computers.
What materials will you use?
3D printers work with hundreds of materials, including polymers, metals,
porcelain, glass, and ceramics.
What are your needs?
Some 3D printers are better than others for specific types of uses. You
may want to look for a 3D printer that will handle small objects, large
objects, or both.
How much will you spend?
3D printers can cost thousands of dollars or a few hundred.
How large is the 3D printer?
3D printers come in all shapes and sizes. Some smaller printers work well
as desktop models, whereas bigger 3D printers can be used for large
spaces.
How large will your print be?
Some 3D printers can handle large prints, while some can only handle
small print jobs.
How fast will your 3D printer print?
3D printers are rated by how fast they print, and the speed will vary
depending on your needs. Some 3D printers print at a rate of several
inches per second, while others print at a rate of inches per hour.
Will you be printing outdoors or indoors?
Some 3D printers work best indoors, while others are best used outdoors.
How to maintain 3D Printing Supplies
3D printing is a new technology that is changing the way people create and engineer new products.- To clean the filament, use soap and water to wet your filament, then wipe it dry with a paper towel.
- To clean the nozzles, wipe them with a damp rag.
- To clean the build plate, wipe it with a clean, lint-free cloth.
- To clean the extruder, use compressed air.
- To clean the build plate, first, remove any building material or part from the plate. Then, use a paper towel or paper towel moistened with rubbing alcohol to wipe off the build plate.
- To clean the extruder, first, unplug the extruder from the 3D printer. Then, moisten a paper towel or paper towel with rubbing alcohol and wipe down the extruder.
- To clean the 3D printer, use compressed air to blow loose dust out of the printer.
- To clean the filament, use compressed air to blow loose dust out of the filament.
- To clean the nozzle, use compressed air to blow loose dust out of the nozzle.
- To clean the build plate, use compressed air to blow loose dust out of the build plate.
- To clean the extruder, use compressed air to blow loose dust out of the extruder.
- To clean the filament, unplug the extruder from the 3D printer and use compressed air to blow loose dust out of the filament.
- To clean the nozzle, unplug the nozzle from the 3D printer and use compressed air to blow loose dust out of the nozzle.
Related posts:
Review 3D Printer Filament,PLA Filament 1.75mm,Printer Filament 1.75mm,PLA 3D Printer Filament,3D Pr...
Review Printer Accessories 1pc T8 Lead screw 3D Printer Parts 515mm/355mm T8 Lead Screw with Copper ...
Review Gizmo Dorks PLA Filament for 3D Printers 1.75mm 200g, 4 Color Pack - Blue, Green, Orange, Red
Review Carbon Fiber Filled Nylon Filament 1.75mm, UltraPA-CF 3D Printer Filament, 250g Spool 3D Prin...
