Review 3D Printer Control Board, Duet3 Mini5 PCB Material LCD 3D Printer Mainboard 28V VORON 2.4 Big CAR for 3D Printer Accessories

Page Contents

Details: 3D Printer Control Board, Duet3 Mini5 PCB Material LCD 3D Printer Mainboard 28V VORON 2.4 Big CAR for 3D Printer Accessories

Brand: SWOQ

Advantages

Products can be returned
Smart Controller: Reprap Discount Smart Controller compatible socket,EXP1 and EXP2 support 2004,12864 and other single color display
Two Automotive Fuses: For hot bed input and main power input,7xPWM power Mosfet output (1 for hot bed,2 for hot end,4 for fan,)
7 Channels: 7 channels TMC2209 stepper motor drive, INPUT and output IO full TVS protection. 2X4 pin outlet for external SD card module, onboard TF card slot,Type‑C USB socket
28V Maximum Input:12V@2ADC‑DC(12V fan power),5V@8A DC‑DC power , two [email protected] LDos (power MCU and 3.3V peripherals respectively
Based on: Based on SAME54P20(ARM Cortex M4@120Mhz), fully compatible with Duet3 Mini5+. UART1‑ for Raspberry pins (including 5V@5A power supply)

Notice

Is an online purchase
Delivery may be delayed in some areas.

Buyer Guide 3D Printer Parts & Accessories

If you’re in the market for a 3D printer, you’ll need accessories. Here, I’ll cover what supplements you should look for, and how to select accessories based on your needs.

Filament. The filament is the material ejected from the extruder nozzle and deposited onto a build platform to build three-dimensional objects.
Build Plates. The build plate is a surface on which the printed object is built.
Heated Bed. The heated bed is a sheet of aluminum or glass that maintains a temperature that is appropriate for printing.
Extruder. The extruder is the nozzle from which the filament is ejected.
Vacuum Extruder. The vacuum extruder is a type of extruder that removes the air between the filament and the bed.
Print Bed. A print bed is a layer of material upon which to print.
Heated Bed. A heated bed is a bed of insulated aluminum or glass that maintains a temperature appropriate for printing.
Nozzle. The nozzle is the extrusion point from which the filament is ejected.
Extruder. The extruder is the nozzle from which the filament is ejected.
Vacuum Extruder. The vacuum extruder is a type of extruder that removes the air

How to choose 3D Printer Parts & Accessories

If you’re shopping for a 3D printer, it’s important to consider which accessories you’ll want. Depending on which 3D printer model you choose, you may require different accessories. For example, if you’re buying a 3D printer with an extruder, you’ll need an extruder barrel, nozzle, and hot end (or tip).

Heaters: Many 3D printers use a heated bed or a heated nozzle, or both. An extruder heater warms the extruder head, and a build plate heater heats the build plate.
Fans: Some 3D printers come with dedicated fans that blow air through the printer or over the bed.
Extruders: Some 3D printers come with an extruder a device that takes filament and melts it, forming objects. When choosing a 3D printer, consider the type of filament it can use, the extruder type, and the extruders diameter.
Build plates: Some 3D printers come with build plates, which are flat surfaces on which the printer can print.
Software: Some 3D printers come with their own software. Each manufacturer has its own operating system. Try before you buy, and see if the software you’re interested in is compatible with your 3D printer model.

How to maintain 3D Printer Parts & Accessories

3D Printer accessories are multifarious and come in a wide range of shapes, sizes, and functions. These accessories can be very expensive, and its important to keep them clean, well-maintained, and in good working order. Here are some tips for maintaining 3D Printer accessories.

If your 3D Printer isnt operating properly, its possible that one of the accessories (e.g. a filament spool) has become damaged or clogged.
The nozzles inside your 3D Printer can get clogged over time. If your 3D Printer is short of a filament spool, you may want to clean the nozzles with compressed air or a specialized nozzle cleaner.
Filament spools can get jammed, too. To release a filament spool thats become jammed, first remove the filament from the spool and unwind it. Then, gently pull the filament up through the spool.
Check that any filament spool youre using isnt overfilled. If it isnt, the spool wont break or break unevenly when you remove it.
Unplug the 3D Printer before cleaning it, as moisture can cause corrosion or rust.
Use a lint-free cloth to wipe away dust and debris from any exposed circuit boards.
Air dry the 3D Printer after cleaning it.
If the 3D Printer is dusty, place a damp cloth on the printers exterior and spray it with a non-abrasive cleaning solution.
If the 3D Printer is dirty, spray it with a non-abrasive cleaning solution, then use a soft brush to scrub off any dirt or debris.
Wipe the 3D Printer down with a dry cloth after cleaning it.