Page Contents
Details: 3D Printer Transfer Board Main Board Display Panel Wiring Board Compatible for CR- 10S pro 3D Printer Parts
Brand: TEHAUX
Advantages
- Products can be returned
- Make sure this fits by entering your model number.
- Can accept 24V input, the same system power can reduce the hot bed current to 1/ 4, effectively solve the hot bed MOS tube heating problem.
- Simply plug and play
- Can be directly connected to Ramps1. 4, 2004LCD control panel and 12864LCD control panel.
- Using high- quality tube, the heat dissipation effect is better.
Notice
- Is an online purchase
- Delivery may be delayed in some areas.
Buyer Guide 3D Printer Parts & Accessories
If you’re in the market for a 3D printer, you’ll need accessories. Here, I’ll cover what supplements you should look for, and how to select accessories based on your needs.- Filament. The filament is the material ejected from the extruder nozzle and deposited onto a build platform to build three-dimensional objects.
- Build Plates. The build plate is a surface on which the printed object is built.
- Heated Bed. The heated bed is a sheet of aluminum or glass that maintains a temperature that is appropriate for printing.
- Extruder. The extruder is the nozzle from which the filament is ejected.
- Vacuum Extruder. The vacuum extruder is a type of extruder that removes the air between the filament and the bed.
- Print Bed. A print bed is a layer of material upon which to print.
- Heated Bed. A heated bed is a bed of insulated aluminum or glass that maintains a temperature appropriate for printing.
- Nozzle. The nozzle is the extrusion point from which the filament is ejected.
- Extruder. The extruder is the nozzle from which the filament is ejected.
- Vacuum Extruder. The vacuum extruder is a type of extruder that removes the air
How to choose 3D Printer Parts & Accessories
Finding the right 3D printer accessories can help to make your 3D printing experience better. Here are some of the key factors to consider:- Does the printer come bundled with accessories? If you purchased a 3D printer online, it may be worthwhile to consult the sellers product description to see if any additional accessories were included.
- Does the printer support third-party accessories?
- Does the printer support its own accessories? Some 3D printers come bundled with their own hardware and accessories, which allow you to get up and running with the 3D printer more quickly.
- Does the printer have interchangeable nozzles?
- Does the printer have a built-in camera?
- Does the printer have Wi-Fi connectivity?
- Does the printer have built-in stereo sound? Some 3D printers come with built-in speakers, allowing you to listen to the audio while printing.
- Does the printer have filament holders? Some 3D printers come with holders for their filament, allowing users to load the filament directly into the printer.
- Does the printer have built-in temperature sensors? Some 3D printers come with built-in temperature sensors, allowing users to check the temperature inside the printer.
- Does the printer have a safety cover? Some 3D printers come with safety covers, which help protect the nozzle of the printer and prevent accidental spills.
- Does the printer have a built-in bed heater? Some 3D printers come with built-in bed heaters, allowing users to print models with a heated bed.
- Does the printer come with a warranty?
- Does the printer support water cooling? Some 3D printers support water cooling, allowing users to cool the hot filament with cooling liquid.
- Does the printer support a filament diameter range of 0.3 to 0.6 millimeters?
How to maintain 3D Printer Parts & Accessories
Maintaining your 3D printer accessories is important because if you don’t, you can end up causing damage to the printer itself.When it comes to your 3D printer accessories, there are a few simple things you can do to keep them running smoothly:
- Clean your filament: The filament you use for your 3D printer is incredibly important, and you need to clean it from time to time. If the filament gets dirty, it can cause problems when youre printing.
- Clean your extruder: Your extruder is responsible for pulling the filament through the extruder nozzle and depositing the filament on the print bed. You can also clean your extruder by lubricating it.
- Lubricate your filament: If your extruder is producing a lot of friction, you will need to lubricate it. One way to do this is by coating your filament in a thin layer of Vaseline.
- Clean your heated bed: The heated bed is another vital part of 3D printing, and it needs to be cleaned regularly. When cleaning the heated bed, start by unplugging the printer. Then, use a paper towel to wipe off any debris from the bed.
- Clean your print bed: To keep your print bed clean, use a paper towel to wipe down your print bed after each print.
- Clean your nozzle: The nozzle, which pushes the filament through your extruder, can get clogged with debris. Use an eraser to clean it.
- Clean the filament spool: Your filament spool can also get clogged with debris. You can clean it by soaking it in warm water and washing it.
- Clean the filament feed chamber: To clean the filament feed chamber, unplug the extruder, remove the filament, and wash the chamber with soap and water.
Related posts:
Review Cusstally 10pcs 3D Printer Parts Blue Aluminum Stepper Driver Heatsink for TMC2100 LV8729 TMC...
Review Official Kywoo Tycoon Slim 3D Printer, Featuring a Direct Drive extruder,Double Z-Axis Stable...
Review ELEGOO Saturn 8K MSLA Resin 3D Printer and ELEGOO ABS-Like 3D Printer Resin Grey 1000g
Review Reference Point Markers Hand-held 3D Scanner 3D Magnetic Marking Point Paste Point Reflector ...