Review 3D Printers Accessory, Direct Drive Extruder Conversion Kit, Easy Installation Durable Injection Parts Stable Reliable Motor Extruder Fan Hood for Hot End

Page Contents

Details: 3D Printers Accessory, Direct Drive Extruder Conversion Kit, Easy Installation Durable Injection Parts Stable Reliable Motor Extruder Fan Hood for Hot End

Brand: Shanrya

Advantages

Products can be returned
Make sure this fits by entering your model number.
The new MDD V1.2 is the simplest direct drive conversion available for Ender‑3, for CR‑10 3D printers.
Lighter than most direct drives, installation takes about 20‑30 minutes ‑ no firmware changes, no volume loss, no cutting or splicing.
MDD is compatible with many extruder and is designed to turn your inventory components into powerful direct‑drive systems without the need for other hardware.
Simplest direct‑drive system for printers. Practical accessory.

Notice

Is an online purchase
Delivery may be delayed in some areas.

Buyer Guide 3D Printer Parts & Accessories

When you’re buying a 3D printer, you are also likely to buy a lot of accessories for it. These accessories include filament, a heated bed, a nozzle, and other important parts.

Filament. The filament is what your 3D printer prints with. Often, you will be able to choose between different filaments, such as PLA, ABS, and PET, which are made from different types of plastic.
Heated Bed. A heated bed is essential to making sure that your 3D printer prints well.
Nozzle. Nozzles typically come with different nozzle sizes. These nozzle sizes determine the diameter of the filament that your 3D printer will print with. So, make sure you choose a nozzle your 3D printer can use.
Other Parts. A heated bed, nozzle, and filament are all essential parts that you should consider buying separately.
Price. Before you buy anything, make sure you know how much it will cost.
Warranty. Most 3D printer accessories come with warranties. Make sure you read these warranties carefully, so you know what you’re signing up for.

How to choose 3D Printer Parts & Accessories

If you’re shopping for a 3D printer, it’s important to consider which accessories you’ll want. Depending on which 3D printer model you choose, you may require different accessories. For example, if you’re buying a 3D printer with an extruder, you’ll need an extruder barrel, nozzle, and hot end (or tip).

Heaters: Many 3D printers use a heated bed or a heated nozzle, or both. An extruder heater warms the extruder head, and a build plate heater heats the build plate.
Fans: Some 3D printers come with dedicated fans that blow air through the printer or over the bed.
Extruders: Some 3D printers come with an extruder a device that takes filament and melts it, forming objects. When choosing a 3D printer, consider the type of filament it can use, the extruder type, and the extruders diameter.
Build plates: Some 3D printers come with build plates, which are flat surfaces on which the printer can print.
Software: Some 3D printers come with their own software. Each manufacturer has its own operating system. Try before you buy, and see if the software you’re interested in is compatible with your 3D printer model.

How to maintain 3D Printer Parts & Accessories

Maintain your accessories to extend their life and get the most use out of them.

Regularly clean your extruder. Most 3D printers come with an extruder, which is a metal tube that extrudes the plastic filament into the print bed.
Clean your build plate. Build plates are the area where your 3D-printed model gets placed on. Some printers come with build plates that do not need to be cleaned, but some do. Regularly cleaning your build plate will extend the life of your build plate.
Clean your heated bed. Heated beds are used to keep your 3D-printed models from warping. To keep them from warping, heated beds are typically coated with a non-stick coating. Regularly cleaning your heated bed will extend its life.
Clean your cartridge. Cartridges are used to store filament, which is the plastic that your 3D printer uses to print your models.
Regularly clean your nozzle. Nozzles are used by 3D printers to create small holes. To clean your nozzle, pour warm, soapy water into a bowl, dip your nozzle, and swirl it around in the soapy water until the nozzle is clean.