Review Anycubic Kobra Go 3D Printer and ANYCUBIC PLA 3D Printer Filament (Transparent) Bundle

Page Contents

Details: Anycubic Kobra Go 3D Printer and ANYCUBIC PLA 3D Printer Filament (Transparent) Bundle

Brand: ANYCUBIC

Advantages

Products can be returned
Make sure this fits by entering your model number.
3D Printer Auto Leveling: Equipped with the Anycubic LeviQ 25-point Auto Leveling System. Free You from Tedious Manual Leveling. Firmware algorithm compensation through 25-point precision detection. Easy to operate, very friendly to new users.
【 & 】 ANYCUBIC 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance ±0.02mm, which making filament outflow smoother, came out homogeneous. The low shrinkage, stable printing dimensions make the fusion between the layers was very good to obtain an even better bridging result. You don’t worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all

Notice

Is an online purchase
Delivery may be delayed in some areas.

Buyer Guide 3D Printing Supplies

When shopping for materials for your 3D printer, it’s important to do your homework. 3D printing isn’t cheap, so you’ll want to purchase the best supplies you can.

Consider the 3D printer. Some printers have certain materials that they work best with.
Consider the material. Some materials work better with certain printers.
Consider the extruder. Some printers work best with an extruder that is compatible with their materials.
Consider the PLA/ABS ratio. PLA and ABS have different melting points. Some printers work best with one type of material.

How to choose 3D Printing Supplies

If you are interested in learning more about 3D printing, you may have already started shopping for the materials and tools you’ll need to create the objects you want.

3D printing is the process by which a three-dimensional object is created one layer at a time. There are six different types of 3D printing materials to choose from:
The filament: This is the material, such as plastic, metal, or ceramics, that is fed into a 3D printer.
Thermal resistance: This refers to how resistant a material is to heat. Some materials, such as PLA, are more thermally sensitive.
The layer thickness: The layer thickness of the material determines how dense the surface can be. The higher the number, the thicker the layer.
The curing speed: This refers to how long it takes for a material to solidify.
The bonding strength: This is the ability of the material to stick to itself or to another object.

Stability: This refers to how resistant a material is to warping or shrinking. Some materials, such as ABS, are more elastic.

When choosing your materials, it’s important to consider which items you plan to print. The printing process requires certain materials like resin, which can be toxic and flammable.

In addition to the materials, you will also want to consider the tools you will need. A 3D printer itself can cost several thousand dollars, so it’s important to choose wisely.

The size of the printer: When choosing a printer, it’s important to consider the size of the object you plan to print.
The printing speed: Depending on your needs, you may need a faster or slower printer.
The resolution: The resolution refers to the level of detail you can include in your print.
The printing volume: The bigger the printer, the more material it can process at a time.
The filament capacity: If you plan to print bigger objects, you may need a bigger capacity.

How to maintain 3D Printing Supplies

3D printing is a new technology that is changing the way people create and engineer new products.

To clean the filament, use soap and water to wet your filament, then wipe it dry with a paper towel.
To clean the nozzles, wipe them with a damp rag.
To clean the build plate, wipe it with a clean, lint-free cloth.
To clean the extruder, use compressed air.
To clean the build plate, first, remove any building material or part from the plate. Then, use a paper towel or paper towel moistened with rubbing alcohol to wipe off the build plate.
To clean the extruder, first, unplug the extruder from the 3D printer. Then, moisten a paper towel or paper towel with rubbing alcohol and wipe down the extruder.
To clean the 3D printer, use compressed air to blow loose dust out of the printer.
To clean the filament, use compressed air to blow loose dust out of the filament.
To clean the nozzle, use compressed air to blow loose dust out of the nozzle.
To clean the build plate, use compressed air to blow loose dust out of the build plate.
To clean the extruder, use compressed air to blow loose dust out of the extruder.
To clean the filament, unplug the extruder from the 3D printer and use compressed air to blow loose dust out of the filament.
To clean the nozzle, unplug the nozzle from the 3D printer and use compressed air to blow loose dust out of the nozzle.