Review Anycubic Kobra Neo Pre-Installed FDM 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Black) Bundle

Page Contents

Details: Anycubic Kobra Neo Pre-Installed FDM 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Black) Bundle

Brand: ANYCUBIC

How to replace filaments1.Install the spool on the spool holder of a 3D printer, and preheat the nozzle2.Cut the top of the filament into a spire shape, and thread it into the extruder and feeding tube3.Manually push the filament through the feeding tube to the nozzle, until the filament melts through the nozzleExtra attention neededWhen installing and replacing filaments, make sure to heat the print head (heated to above 200°C), otherwise the print head might get clogged.

Advantages

Products can be returned
Make sure this fits by entering your model number.
Easy Assembly & Fast Printing: ANYCUBIC KOBRA NEO 3D Printe is pre-Installed 3D Printers. It is makes it possible to set up the 3d printer within 10 minutes. Faster installation than other FDM 3D printers. Anycubic Kobra Neo prints at a typical speed of 6 cm/s and reaches 10 cm/s at its highest, which will save much time.
【 & 】 ANYCUBIC 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance ±0.02mm, which making filament outflow smoother, came out homogeneous. The low shrinkage, stable printing dimensions make the fusion between the layers was very good to obtain an even better bridging result. You don’t worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all

Notice

Is an online purchase
Delivery may be delayed in some areas.

Buyer Guide 3D Printers

3D Printers offer users the ability to create physical objects from digital files. Buying the right 3D Printer can be a daunting task and this guide is here to help you make the right decision.

Budget. Budget is the biggest factor that should guide your buying decision. While a low-end printer may suffice for most users, the difference in print quality between a low-end and a high-end printer may not be worth the added cost.
Nozzle Size. Nozzle size determines the size of the nozzle tip. A larger nozzle tip prints finer details, but requires more time to print. The tradeoff is that printing a large object may require more material.
Filament Diameter. The filament diameter determines the diameter of the extruded thread. The thinner the filament the better the resolution, but the larger the print. The bigger the print, the longer it takes to print.
Print Speed. Print speed determines how fast the printer can print, measured in mm/s. Higher print speeds allow you to print larger objects in a short time.
Nozzle Change Time. The nozzle change will determine how quickly you can replace a nozzle tip. Changing a nozzle tip with a slow change time means you need to wait for the printer to cool down before you can replace the nozzle tip.

How to choose 3D Printers

3D printing is a fairly new technology, and it can be difficult to sort through all of the different products available. Before you invest in a new printer, it’s important to consider which 3D printer model will best suit your printing needs.

Are you going to print mostly small items, or bigger, highly detailed parts? If you are only going to be printing small, highly detailed items, you may want to invest in a printer that can produce smaller parts.
Do you want to print in plastic or metal? Some printers can print in plastic, while others can print in metal. Also, some printers can print both.
Do you need to print in full color? If you are looking to create full-color prints, you will likely need a 3D printer that can print in full color. Most 3D printers can print in somewhere between 1 and 6 colors.
Do you need to print in high resolution? If you are printing in plastic, you may need to invest in a printer with a high-resolution printhead.
Do you need to print in biodegradable materials? More and more 3D printers are capable of producing prints in biodegradable materials like PLA.
Do you need to print using 3D models? Some 3D printers can scan an object and turn it into a 3D model that the printer can print.

How to maintain 3D Printers

3D printing is a remarkable way to create complex, functional objects. However, 3D printing is also incredibly time-consuming, complicated, and expensive.

Because of this, many 3D printers require regular maintenance. For instance, most 3D printers have a nozzle, which can get clogged with debris over time.

These clogs can slow down your prints, cause jams and errors, and ruin the quality of your 3D creations.

There are countless tutorials and guides on how to unclog a 3D printer’s nozzle. However, many of these guides require expensive replacement parts or professional equipment.

Luckily, there are several ways to clean your 3D printer’s nozzle without purchasing expensive replacement parts. Some of the most common ways to clean a 3D printer’s nozzle are: