Review Befenybay 10Pcs Stainless Steel M6 Thread HeatBreak Throat for Ender 3 Series,CR10 Series 3D Printer (Stainless Steel)

Page Contents

Details: Befenybay 10Pcs Stainless Steel M6 Thread HeatBreak Throat for Ender 3 Series,CR10 Series 3D Printer (Stainless Steel)

Brand: Befenybay

Advantages

Products can be returned
Make sure this fits by entering your model number.
【Material】Stainless steel
【Widely Used】Widely used for Ender 3,Ender 3S, Ender 3 Pro,Ender 3 V2,Ender 5,CR10,CR10S and other 3D Printer
【Size】 27x7x7mm/1.06×0.27×0.27inch,thread M6, diameter 7mm
【Bore】4.1mm straight through bore,teflon tube straight-through nozzle to prevent plugging

Notice

Is an online purchase
Delivery may be delayed in some areas.

Buyer Guide 3D Printer Parts & Accessories

If you are looking to purchase 3D printer accessories, here are a few tips that may help you narrow down your choice.

Type of printer. Many 3D printer accessories, such as 3D pens, are customizable. On the other hand, other accessories, such as filament spools, are not.
Size. Filament spools come in various sizes, the main two are 1.75mm and 3mm.
Material. Filament spools come in many materials, including PLA, ABS, or PVA.
Computer. Some 3D printer accessories can be connected via USB, while others require a computer.
Type. If you’re a beginner, you may want to consider a 3D printer kit.
Features. Most 3D printer accessories come with basic features. However, you can find accessories with more advanced settings, such as the ability to print in colors or multiple materials.

How to choose 3D Printer Parts & Accessories

If you’re shopping for a 3D printer, it’s important to consider which accessories you’ll want. Depending on which 3D printer model you choose, you may require different accessories. For example, if you’re buying a 3D printer with an extruder, you’ll need an extruder barrel, nozzle, and hot end (or tip).

Heaters: Many 3D printers use a heated bed or a heated nozzle, or both. An extruder heater warms the extruder head, and a build plate heater heats the build plate.
Fans: Some 3D printers come with dedicated fans that blow air through the printer or over the bed.
Extruders: Some 3D printers come with an extruder a device that takes filament and melts it, forming objects. When choosing a 3D printer, consider the type of filament it can use, the extruder type, and the extruders diameter.
Build plates: Some 3D printers come with build plates, which are flat surfaces on which the printer can print.
Software: Some 3D printers come with their own software. Each manufacturer has its own operating system. Try before you buy, and see if the software you’re interested in is compatible with your 3D printer model.

How to maintain 3D Printer Parts & Accessories

Maintain your accessories to extend their life and get the most use out of them.

Regularly clean your extruder. Most 3D printers come with an extruder, which is a metal tube that extrudes the plastic filament into the print bed.
Clean your build plate. Build plates are the area where your 3D-printed model gets placed on. Some printers come with build plates that do not need to be cleaned, but some do. Regularly cleaning your build plate will extend the life of your build plate.
Clean your heated bed. Heated beds are used to keep your 3D-printed models from warping. To keep them from warping, heated beds are typically coated with a non-stick coating. Regularly cleaning your heated bed will extend its life.
Clean your cartridge. Cartridges are used to store filament, which is the plastic that your 3D printer uses to print your models.
Regularly clean your nozzle. Nozzles are used by 3D printers to create small holes. To clean your nozzle, pour warm, soapy water into a bowl, dip your nozzle, and swirl it around in the soapy water until the nozzle is clean.