Review Creality CR-10 V3 3D Printer New Version with Titan Direct Drive, Silent Motherboard Installed and MeanWell Power Supply Large Build Volume 300x300x400mm

• Facebook
• Twitter
• Line

Details: Creality CR-10 V3 3D Printer New Version with Titan Direct Drive, Silent Motherboard Installed and MeanWell Power Supply Large Build Volume 300x300x400mm

Brand: Comgrow

Previous page Comgrow is the first seller of Creality 3D on Amazon. We own more 20 technical staff to provide professional support to all customers. Comgrow is devoted to provide high quality and economical 3D printer, excellent after-sales service to all customers. Comgrow 3D Printer Next page

Buyer Guide 3D Printers

If you’re looking to buy a 3D Printer, read on. The following buying guide gives all the information you need to make a sound choice.

• The 3 main printer types are desktop 3D printers, industrial 3D printers, and fused deposition modeling (FDM) printers.
• Desktop 3D printers are cheap, easy to use, and quite affordable. They work well for small projects and are a great choice for home use.
• Industrial 3D printers are versatile, reliable, and can handle larger heavier materials. They’re also the most expensive 3D printers.
• FDM printers are the least expensive 3D printers. They’re best suited for hobbyists, students, and classrooms.
• Most 3D printers are 3D scanners. You can use these devices to scan your ideas, objects, or designs, and then print them.
• Printers have four main parts: the print bed, the extruder, the nozzle, and the motor.
• Printers come in two main types: fused filament fabrication (FFF) and fused deposition modeling (FDM). FFF 3D printers use spools of filaments (plastic), while FDM 3D printers use thermoplastic (plastic) powder.

How to choose 3D Printers

When shopping for a 3D printer, there are a couple of key factors to keep in mind:

• How easy is the 3D printer to use? Buying a 3D printer can be intimidating, particularly if you’re not familiar with how it works. When choosing a printer, look for one that has a clear instruction manual, as well as clear and detailed guides online. Also, consider whether the 3D printer comes with software or is compatible with other platforms.
• Does the 3D printer work right? 3D printers aren’t cheap. Before you buy a 3D printer, it’s important to test it out and make sure it works right. Most 3D printers come with either an SD card or a USB flash drive, so it’s a good idea to download and test the 3D printer’s software before committing to the purchase.

How to maintain 3D Printers

 Once you buy your 3D printer, you’re going to want to maintain it. As 3DPrint.com notes, there are a few steps you should take on a regular basis, including removing and cleaning the print bed, cleaning the printer, and regularly changing the filament.

• Remove and clean the print bed: The print bed is the part of the 3D printer that holds the filament as it is heated up and extruded into the 3D print. Regularly removing and cleaning the print bed can help your 3D printer last longer and help prevent print failure.
• Clean the printer: The most common issue people run into with their 3D printers is nozzle clogs. If your printer overheats, a clog may form in the nozzle. If you notice a clog, try cleaning it using a hot air blower. If you notice a clog in the nozzle, it may be necessary to replace the nozzle.
• Regularly change the filament: When you print with your 3D printer, you use filament. This can be messy, so it’s important to regularly clean the filament and change out the old filament with a new one.

 

---

 

• Facebook
• Twitter
• Line