Review Creality Ender-3 S1 Plus 3D Printer Ender-3 S1 Pro Upgrade with 300*300*300 mm Build Volume

• Facebook
• Twitter
• Line

Details: Creality Ender-3 S1 Plus 3D Printer Ender-3 S1 Pro Upgrade with 300*300*300 mm Build Volume

Brand: Creality

Creality Ender-3 S1 Plus

Buyer Guide 3D Printers

 3D Printers offer users the ability to create physical objects from digital files. Buying the right 3D Printer can be a daunting task and this guide is here to help you make the right decision.

• Budget. Budget is the biggest factor that should guide your buying decision. While a low-end printer may suffice for most users, the difference in print quality between a low-end and a high-end printer may not be worth the added cost.
• Nozzle Size. Nozzle size determines the size of the nozzle tip. A larger nozzle tip prints finer details, but requires more time to print. The tradeoff is that printing a large object may require more material.
• Filament Diameter. The filament diameter determines the diameter of the extruded thread. The thinner the filament the better the resolution, but the larger the print. The bigger the print, the longer it takes to print.
• Print Speed. Print speed determines how fast the printer can print, measured in mm/s. Higher print speeds allow you to print larger objects in a short time.
• Nozzle Change Time. The nozzle change will determine how quickly you can replace a nozzle tip. Changing a nozzle tip with a slow change time means you need to wait for the printer to cool down before you can replace the nozzle tip.

 

How to choose 3D Printers

When shopping for a 3D printer, there are a couple of key factors to keep in mind:

• How easy is the 3D printer to use? Buying a 3D printer can be intimidating, particularly if you’re not familiar with how it works. When choosing a printer, look for one that has a clear instruction manual, as well as clear and detailed guides online. Also, consider whether the 3D printer comes with software or is compatible with other platforms.
• Does the 3D printer work right? 3D printers aren’t cheap. Before you buy a 3D printer, it’s important to test it out and make sure it works right. Most 3D printers come with either an SD card or a USB flash drive, so it’s a good idea to download and test the 3D printer’s software before committing to the purchase.

How to maintain 3D Printers

3D printing is a remarkable way to create complex, functional objects. However, 3D printing is also incredibly time-consuming, complicated, and expensive.

Because of this, many 3D printers require regular maintenance. For instance, most 3D printers have a nozzle, which can get clogged with debris over time.

These clogs can slow down your prints, cause jams and errors, and ruin the quality of your 3D creations.

There are countless tutorials and guides on how to unclog a 3D printer’s nozzle. However, many of these guides require expensive replacement parts or professional equipment.

Luckily, there are several ways to clean your 3D printer’s nozzle without purchasing expensive replacement parts. Some of the most common ways to clean a 3D printer’s nozzle are:

• Cleaning the nozzle with alcohol.
• Cleaning the nozzle with dish soap.
• Installing a UV lamp.
• Cleaning the nozzle with a toothbrush.
• Using a rotating brush.
• Using compressed air to blow away debris.

---

 

• Facebook
• Twitter
• Line