Review DOLUNTO Couplings Coupler Aluminum Alloy Coupling Bore 5mm 8mm for 3D Printers Parts Blue Flexible Shaft Coupler Screw Part for Stepper Motor Accessories (Inner Diameter : 6.35mm to 8mm)

Page Contents

Details: DOLUNTO Couplings Coupler Aluminum Alloy Coupling Bore 5mm 8mm for 3D Printers Parts Blue Flexible Shaft Coupler Screw Part for Stepper Motor Accessories (Inner Diameter : 6.35mm to 8mm)

Brand: DOLUNTO

Advantages

Products can be returned
Type : Blue coupler
Diameter : 14mm
Length : 25mm
D1xd2 : 3×5 , 3×6 , 3×8 , 4×4 , 4×5 , 4×6 , 4×7 , 4×8 , 5×5 , 5×6 , 5×6.35 , 5×7 , 5×8 , 6×6 , 6×7 , 6×8 , 6.35×6.35 , 6.35×8 , 7×8 , 8×8
Material : aluminum alloy

Notice

Is an online purchase
Delivery may be delayed in some areas.

Buyer Guide 3D Printer Parts & Accessories

If you’re in the market for a 3D printer, you’ll need accessories. Here, I’ll cover what supplements you should look for, and how to select accessories based on your needs.

Filament. The filament is the material ejected from the extruder nozzle and deposited onto a build platform to build three-dimensional objects.
Build Plates. The build plate is a surface on which the printed object is built.
Heated Bed. The heated bed is a sheet of aluminum or glass that maintains a temperature that is appropriate for printing.
Extruder. The extruder is the nozzle from which the filament is ejected.
Vacuum Extruder. The vacuum extruder is a type of extruder that removes the air between the filament and the bed.
Print Bed. A print bed is a layer of material upon which to print.
Heated Bed. A heated bed is a bed of insulated aluminum or glass that maintains a temperature appropriate for printing.
Nozzle. The nozzle is the extrusion point from which the filament is ejected.
Extruder. The extruder is the nozzle from which the filament is ejected.
Vacuum Extruder. The vacuum extruder is a type of extruder that removes the air

How to choose 3D Printer Parts & Accessories

When it comes to choosing the best 3D printer accessories, customization is key.

Wireless printer: Wireless printers allow you to print up to 50 feet away from your 3D printer.
Filament: Filament is a type of plastic that can be melted down and extruded through a heated nozzle. Filament comes in a variety of different materials and colors.
Filament holder: Filament holders make it easy to store your filament and keep track of how full it is.
Multi-tool: A multi-tool is an essential addition to any 3D printer. Multi-tools allow you to remove and swap out filament cartridges, filament reels, and filament feed systems.
Nozzle cleaner: Nozzle cleaners are brushes that clean the nozzle of your 3D printer.
Magnetic sheet: Magnetic sheets are sheets of magnetic material that can be cut to size or placed over the bed of your 3D printer. A magnetic sheet helps the suction of open-cell printer foam, such as ABS, as well as creates magnets that can attach to the bed to keep your printer in place.
Heated bed: Heated beds are heated platforms that, when printed or placed on top of, create the material. A heated bed is important for printing objects that require a heated surface, such as ABS.
Nozzle kit: Nozzle kits are composed of several nozzles, which are the heating elements in your 3D printer.
Vacuum bags: Vacuum bags are bags that are sealed with vacuums and then opened. These bags can be used to store filament, or, if sealed, can be used to store parts or objects that need to be secured.
Vacuum bottle: Vacuum bottles are containers that can be sealed with vacuums and then opened. These bottles can store filament, or, if sealed, can be used too.

How to maintain 3D Printer Parts & Accessories

Maintain your accessories to extend their life and get the most use out of them.

Regularly clean your extruder. Most 3D printers come with an extruder, which is a metal tube that extrudes the plastic filament into the print bed.
Clean your build plate. Build plates are the area where your 3D-printed model gets placed on. Some printers come with build plates that do not need to be cleaned, but some do. Regularly cleaning your build plate will extend the life of your build plate.
Clean your heated bed. Heated beds are used to keep your 3D-printed models from warping. To keep them from warping, heated beds are typically coated with a non-stick coating. Regularly cleaning your heated bed will extend its life.
Clean your cartridge. Cartridges are used to store filament, which is the plastic that your 3D printer uses to print your models.
Regularly clean your nozzle. Nozzles are used by 3D printers to create small holes. To clean your nozzle, pour warm, soapy water into a bowl, dip your nozzle, and swirl it around in the soapy water until the nozzle is clean.