Review ELEGOO Air Purifier for LCD/DLP/MSLA 3D Printers (Pack of 2)

• Facebook
• Twitter
• Line

Details: ELEGOO Air Purifier for LCD/DLP/MSLA 3D Printers (Pack of 2)

Brand: ELEGOO

Previous page ELEGOO implies the combination of open-source electronics and structures that creates everything. About brand vision: Create the future, interpreted as “With the help of programming and 3D printing technology, we can create almost anything—ELEGOO provides geeks with the key to a new world.” ELEGOO 3D Printing Resin Visit the Store ELEGOO 3D Printing Resin Visit the Store ELEGOO 3D Printer Visit the Store ELEGOO Wash and Cure Machine Visit the Store Next page

Buyer Guide 3D Printer Parts & Accessories

 When you’re buying a 3D printer, you are also likely to buy a lot of accessories for it. These accessories include filament, a heated bed, a nozzle, and other important parts.

• Filament. The filament is what your 3D printer prints with. Often, you will be able to choose between different filaments, such as PLA, ABS, and PET, which are made from different types of plastic.
• Heated Bed. A heated bed is essential to making sure that your 3D printer prints well.
• Nozzle. Nozzles typically come with different nozzle sizes. These nozzle sizes determine the diameter of the filament that your 3D printer will print with. So, make sure you choose a nozzle your 3D printer can use.
• Other Parts. A heated bed, nozzle, and filament are all essential parts that you should consider buying separately.
• Price. Before you buy anything, make sure you know how much it will cost.
• Warranty. Most 3D printer accessories come with warranties. Make sure you read these warranties carefully, so you know what you’re signing up for.

 

How to choose 3D Printer Parts & Accessories

 If you’re shopping for a 3D printer, it’s important to consider which accessories you’ll want. Depending on which 3D printer model you choose, you may require different accessories. For example, if you’re buying a 3D printer with an extruder, you’ll need an extruder barrel, nozzle, and hot end (or tip).

• Heaters: Many 3D printers use a heated bed or a heated nozzle, or both. An extruder heater warms the extruder head, and a build plate heater heats the build plate.
• Fans: Some 3D printers come with dedicated fans that blow air through the printer or over the bed.
• Extruders: Some 3D printers come with an extruder — a device that takes filament and melts it, forming objects. When choosing a 3D printer, consider the type of filament it can use, the extruder type, and the extruder’s diameter.
• Build plates: Some 3D printers come with build plates, which are flat surfaces on which the printer can print.
• Software: Some 3D printers come with their own software. Each manufacturer has its own operating system. Try before you buy, and see if the software you’re interested in is compatible with your 3D printer model.

 

How to maintain 3D Printer Parts & Accessories

 Maintain your accessories to extend their life and get the most use out of them.

• Regularly clean your extruder. Most 3D printers come with an extruder, which is a metal tube that extrudes the plastic filament into the print bed.
• Clean your build plate. Build plates are the area where your 3D-printed model gets placed on. Some printers come with build plates that do not need to be cleaned, but some do. Regularly cleaning your build plate will extend the life of your build plate.
• Clean your heated bed. Heated beds are used to keep your 3D-printed models from warping. To keep them from warping, heated beds are typically coated with a non-stick coating. Regularly cleaning your heated bed will extend its life.
• Clean your cartridge. Cartridges are used to store filament, which is the plastic that your 3D printer uses to print your models.
• Regularly clean your nozzle. Nozzles are used by 3D printers to create small holes. To clean your nozzle, pour warm, soapy water into a bowl, dip your nozzle, and swirl it around in the soapy water until the nozzle is clean.

---

 

• Facebook
• Twitter
• Line