Review Flashforge Guider 2 3D Printer, Large Size Intelligent Industrial Grade 3D Printer,Resume Printing for Serious Hobbyists and Professionals with Production Demands, Build Volume(280X250X300mm)

• Facebook
• Twitter
• Line

Details: Flashforge Guider 2 3D Printer, Large Size Intelligent Industrial Grade 3D Printer,Resume Printing for Serious Hobbyists and Professionals with Production Demands, Build Volume(280X250X300mm)

Brand: FLASHFORGE

Buyer Guide 3D Printers

 A 3D printer is a machine that allows you to create three-dimensional objects from a digital file or from a 3D model.

• Price. The price ranges from $300 for an entry-level printer to $5,000 for an industrial printer.
• Print Speed. The print speed is the amount of time it takes to print a 3D object. The print speed varies with the printer model, but the average is 0.2 to 0.4 seconds per layer.
• Resolution. The resolution is the number of points per inch (PPI). The higher the resolution, the more detailed the 3D object will be. The higher the resolution, the more detailed the 3D object will be.
• Nozzle size. The nozzle size indicates the size of the nozzle used. The nozzle size on entry-level printers is 0.4 mm and goes to 0.3 mm on professional printers.
• Materials. There are many types of 3D prints. The most common is PLA, which is approved by the ABS standards.
• Filament. The filament is the material that goes into the nozzle of the printer. The filament comes in various colors and is typically sold in 1.75-gallon spools.

How to choose 3D Printers

When shopping for a 3D printer, there are a couple of key factors to keep in mind:

• How easy is the 3D printer to use? Buying a 3D printer can be intimidating, particularly if you’re not familiar with how it works. When choosing a printer, look for one that has a clear instruction manual, as well as clear and detailed guides online. Also, consider whether the 3D printer comes with software or is compatible with other platforms.
• Does the 3D printer work right? 3D printers aren’t cheap. Before you buy a 3D printer, it’s important to test it out and make sure it works right. Most 3D printers come with either an SD card or a USB flash drive, so it’s a good idea to download and test the 3D printer’s software before committing to the purchase.

How to maintain 3D Printers

 Once you buy your 3D printer, you’re going to want to maintain it. As 3DPrint.com notes, there are a few steps you should take on a regular basis, including removing and cleaning the print bed, cleaning the printer, and regularly changing the filament.

• Remove and clean the print bed: The print bed is the part of the 3D printer that holds the filament as it is heated up and extruded into the 3D print. Regularly removing and cleaning the print bed can help your 3D printer last longer and help prevent print failure.
• Clean the printer: The most common issue people run into with their 3D printers is nozzle clogs. If your printer overheats, a clog may form in the nozzle. If you notice a clog, try cleaning it using a hot air blower. If you notice a clog in the nozzle, it may be necessary to replace the nozzle.
• Regularly change the filament: When you print with your 3D printer, you use filament. This can be messy, so it’s important to regularly clean the filament and change out the old filament with a new one.

 

---

 

• Facebook
• Twitter
• Line