Review FTVOGUE 2PCS 3D Printer Throat Nozzle Throat All Metal 3D Printer Parts for for CR 6 SE

• Facebook
• Twitter
• Line

Details: FTVOGUE 2PCS 3D Printer Throat Nozzle Throat All Metal 3D Printer Parts for for CR 6 SE

Brand: FTVOGUE

Buyer Guide 3D Printer Parts & Accessories

If you’re in the market for a 3D printer, you’ll need accessories. Here, I’ll cover what supplements you should look for, and how to select accessories based on your needs.

• Filament. The filament is the material ejected from the extruder nozzle and deposited onto a build platform to build three-dimensional objects.
• Build Plates. The build plate is a surface on which the printed object is built.
• Heated Bed. The heated bed is a sheet of aluminum or glass that maintains a temperature that is appropriate for printing.
• Extruder. The extruder is the nozzle from which the filament is ejected.
• Vacuum Extruder. The vacuum extruder is a type of extruder that removes the air between the filament and the bed.
• Print Bed. A print bed is a layer of material upon which to print.
• Heated Bed. A heated bed is a bed of insulated aluminum or glass that maintains a temperature appropriate for printing.
• Nozzle. The nozzle is the extrusion point from which the filament is ejected.
• Extruder. The extruder is the nozzle from which the filament is ejected.
• Vacuum Extruder. The vacuum extruder is a type of extruder that removes the air

How to choose 3D Printer Parts & Accessories

 If you’re shopping for a 3D printer, it’s important to consider which accessories you’ll want. Depending on which 3D printer model you choose, you may require different accessories. For example, if you’re buying a 3D printer with an extruder, you’ll need an extruder barrel, nozzle, and hot end (or tip).

• Heaters: Many 3D printers use a heated bed or a heated nozzle, or both. An extruder heater warms the extruder head, and a build plate heater heats the build plate.
• Fans: Some 3D printers come with dedicated fans that blow air through the printer or over the bed.
• Extruders: Some 3D printers come with an extruder — a device that takes filament and melts it, forming objects. When choosing a 3D printer, consider the type of filament it can use, the extruder type, and the extruder’s diameter.
• Build plates: Some 3D printers come with build plates, which are flat surfaces on which the printer can print.
• Software: Some 3D printers come with their own software. Each manufacturer has its own operating system. Try before you buy, and see if the software you’re interested in is compatible with your 3D printer model.

 

How to maintain 3D Printer Parts & Accessories

 Maintain your accessories to extend their life and get the most use out of them.

• Regularly clean your extruder. Most 3D printers come with an extruder, which is a metal tube that extrudes the plastic filament into the print bed.
• Clean your build plate. Build plates are the area where your 3D-printed model gets placed on. Some printers come with build plates that do not need to be cleaned, but some do. Regularly cleaning your build plate will extend the life of your build plate.
• Clean your heated bed. Heated beds are used to keep your 3D-printed models from warping. To keep them from warping, heated beds are typically coated with a non-stick coating. Regularly cleaning your heated bed will extend its life.
• Clean your cartridge. Cartridges are used to store filament, which is the plastic that your 3D printer uses to print your models.
• Regularly clean your nozzle. Nozzles are used by 3D printers to create small holes. To clean your nozzle, pour warm, soapy water into a bowl, dip your nozzle, and swirl it around in the soapy water until the nozzle is clean.

---

 

• Facebook
• Twitter
• Line