Web Analytics

Review FYSETC 3D Printer Anycubi-Vyper Smooth/Textured Build Plate Sheet 265x250mm/10.43×9.84inch-Double-Sided PEI Magnetic Spring Steel Plate Heated Bed Surface Parts with Soft Sticker-Gold, 265x250mm

Page Contents

Details: FYSETC 3D Printer Anycubi-Vyper Smooth/Textured Build Plate Sheet 265x250mm/10.43×9.84inch-Double-Sided PEI Magnetic Spring Steel Plate Heated Bed Surface Parts with Soft Sticker-Gold, 265x250mm

Brand: FYSETC

review FYSETC 3D Printer Anycubi-Vyper Smooth/Textured Build Plate Sheet 265x250mm/10.43x9.84inch-Double-Sided PEI Magnetic Spring Steel Plate Heated Bed Surface Parts with Soft Sticker-Gold, 265x250mm

check price FYSETC 3D Printer Anycubi-Vyper Smooth/Textured Build Plate Sheet 265x250mm/10.43x9.84inch-Double-Sided PEI Magnetic Spring Steel Plate Heated Bed Surface Parts with Soft Sticker-Gold, 265x250mm

Advantages

  • Products can be returned
  • Make sure this fits by entering your model number.
  • Update: New Upgraded ANYCUBI Vyper 3D Printing Platforms concludes 2 parts: 1x【Textured/Smooth Double Sided】PEI Sheet + 1x soft magnetic bottom sticker. This steel plate is Double-Side Coated, one side with Gold Powder, another with a Smooth PEI pre sticked, giving you two different experiences just by flipping it over.
  • SIZE: 265x250mm/10.43×9.84in, fits for Anycubi Vyper hotbed or other similar size build plate, please re-measure your printing bed before ordering to avoid the wrong size, not rely on your printing volume.
  • Easy to use: The double sides coated sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform on the top.Both sides can be used to print, convenient. The pei sheet is pre-sticked by machine, no worry about the bubbles, please peel off the profective film on the pei surface before using.
  • Application: Most filaments, such as pla, petg, can print directly on to the pei surface without the need for additional adhesives, tapes or slurry. Kindly note printing ABS needs a thermal insulation environment.

Notice

  • Is an online purchase
  • Delivery may be delayed in some areas.

review FYSETC 3D Printer Anycubi-Vyper Smooth/Textured Build Plate Sheet 265x250mm/10.43x9.84inch-Double-Sided PEI Magnetic Spring Steel Plate Heated Bed Surface Parts with Soft Sticker-Gold, 265x250mm

review FYSETC 3D Printer Anycubi-Vyper Smooth/Textured Build Plate Sheet 265x250mm/10.43x9.84inch-Double-Sided PEI Magnetic Spring Steel Plate Heated Bed Surface Parts with Soft Sticker-Gold, 265x250mm

Buyer Guide 3D Printer Parts & Accessories

 When you’re buying a 3D printer, you are also likely to buy a lot of accessories for it. These accessories include filament, a heated bed, a nozzle, and other important parts.

  • Filament. The filament is what your 3D printer prints with. Often, you will be able to choose between different filaments, such as PLA, ABS, and PET, which are made from different types of plastic.
  • Heated Bed. A heated bed is essential to making sure that your 3D printer prints well.
  • Nozzle. Nozzles typically come with different nozzle sizes. These nozzle sizes determine the diameter of the filament that your 3D printer will print with. So, make sure you choose a nozzle your 3D printer can use.
  • Other Parts. A heated bed, nozzle, and filament are all essential parts that you should consider buying separately.
  • Price. Before you buy anything, make sure you know how much it will cost.
  • Warranty. Most 3D printer accessories come with warranties. Make sure you read these warranties carefully, so you know what you’re signing up for.

 

How to choose 3D Printer Parts & Accessories

 Finding the right 3D printer accessories can help to make your 3D printing experience better. Here are some of the key factors to consider:

  • Does the printer come bundled with accessories? If you purchased a 3D printer online, it may be worthwhile to consult the seller’s product description to see if any additional accessories were included.
  • Does the printer support third-party accessories?
  • Does the printer support its own accessories? Some 3D printers come bundled with their own hardware and accessories, which allow you to get up and running with the 3D printer more quickly.
  • Does the printer have interchangeable nozzles?
  • Does the printer have a built-in camera?
  • Does the printer have Wi-Fi connectivity?
  • Does the printer have built-in stereo sound? Some 3D printers come with built-in speakers, allowing you to listen to the audio while printing.
  • Does the printer have filament holders? Some 3D printers come with holders for their filament, allowing users to load the filament directly into the printer.
  • Does the printer have built-in temperature sensors? Some 3D printers come with built-in temperature sensors, allowing users to check the temperature inside the printer.
  • Does the printer have a safety cover? Some 3D printers come with safety covers, which help protect the nozzle of the printer and prevent accidental spills.
  • Does the printer have a built-in bed heater? Some 3D printers come with built-in bed heaters, allowing users to print models with a heated bed.
  • Does the printer come with a warranty?
  • Does the printer support water cooling? Some 3D printers support water cooling, allowing users to cool the hot filament with cooling liquid.
  • Does the printer support a filament diameter range of 0.3 to 0.6 millimeters?

How to maintain 3D Printer Parts & Accessories

 Maintain your accessories to extend their life and get the most use out of them.

  • Regularly clean your extruder. Most 3D printers come with an extruder, which is a metal tube that extrudes the plastic filament into the print bed.
  • Clean your build plate. Build plates are the area where your 3D-printed model gets placed on. Some printers come with build plates that do not need to be cleaned, but some do. Regularly cleaning your build plate will extend the life of your build plate.
  • Clean your heated bed. Heated beds are used to keep your 3D-printed models from warping. To keep them from warping, heated beds are typically coated with a non-stick coating. Regularly cleaning your heated bed will extend its life.
  • Clean your cartridge. Cartridges are used to store filament, which is the plastic that your 3D printer uses to print your models.
  • Regularly clean your nozzle. Nozzles are used by 3D printers to create small holes. To clean your nozzle, pour warm, soapy water into a bowl, dip your nozzle, and swirl it around in the soapy water until the nozzle is clean.