Review JF-XUAN Accessories, DIY 10Pcs/Pack 16T 5mm/8mm Aluminum Alloy Timing Pulley for 3D Printer Part

Page Contents

Details: JF-XUAN Accessories, DIY 10Pcs/Pack 16T 5mm/8mm Aluminum Alloy Timing Pulley for 3D Printer Part – 5.0mm Printer 3D Printer Accessories

Brand: JF-XUAN

Advantages

Products can be returned
Make sure this fits by entering your model number.
Accurate transmission, without slipping at work, having a constant gear ratio.
Smooth transmission, a buffer, damping capacity, low noise.
High transmission efficiency, energy-saving effect.
Easy maintenance, no lubricants.

Notice

Is an online purchase
Delivery may be delayed in some areas.

Buyer Guide 3D Printer Parts & Accessories

If you’re asking yourself, “What can I buy with a 3D printer?”, this guide is for you.

Filaments. 3D printers require filament, which is a material that’s melted and extruded through a heated nozzle. Filaments come in many colors, and you can choose transparent, opaque, or metallic filaments.
Tools. You definitely need a printer filament scraper, filament removal tool, and nozzle cleaning brushes.
Studio furniture. A 3D printer desk is highly recommended, as it will allow you to have a proper surface to print on. You can also buy other furniture, including chairs, tables, shelves, and storage units.
Software. Make sure your printer is compatible with the software you want to download. This will allow you to print 3D models from the comfort of your home or office.
Documents. You’ll need a 3D modeling program that can create a 3D model of whatever you’d like to create.
Other accessories. Buy a 3D printer enclosure, a 3D printer stand, and acrylic sheets.

How to choose 3D Printer Parts & Accessories

When it comes to choosing the best 3D printer accessories, customization is key.

Wireless printer: Wireless printers allow you to print up to 50 feet away from your 3D printer.
Filament: Filament is a type of plastic that can be melted down and extruded through a heated nozzle. Filament comes in a variety of different materials and colors.
Filament holder: Filament holders make it easy to store your filament and keep track of how full it is.
Multi-tool: A multi-tool is an essential addition to any 3D printer. Multi-tools allow you to remove and swap out filament cartridges, filament reels, and filament feed systems.
Nozzle cleaner: Nozzle cleaners are brushes that clean the nozzle of your 3D printer.
Magnetic sheet: Magnetic sheets are sheets of magnetic material that can be cut to size or placed over the bed of your 3D printer. A magnetic sheet helps the suction of open-cell printer foam, such as ABS, as well as creates magnets that can attach to the bed to keep your printer in place.
Heated bed: Heated beds are heated platforms that, when printed or placed on top of, create the material. A heated bed is important for printing objects that require a heated surface, such as ABS.
Nozzle kit: Nozzle kits are composed of several nozzles, which are the heating elements in your 3D printer.
Vacuum bags: Vacuum bags are bags that are sealed with vacuums and then opened. These bags can be used to store filament, or, if sealed, can be used to store parts or objects that need to be secured.
Vacuum bottle: Vacuum bottles are containers that can be sealed with vacuums and then opened. These bottles can store filament, or, if sealed, can be used too.

How to maintain 3D Printer Parts & Accessories

3D Printer accessories are multifarious and come in a wide range of shapes, sizes, and functions. These accessories can be very expensive, and its important to keep them clean, well-maintained, and in good working order. Here are some tips for maintaining 3D Printer accessories.

If your 3D Printer isnt operating properly, its possible that one of the accessories (e.g. a filament spool) has become damaged or clogged.
The nozzles inside your 3D Printer can get clogged over time. If your 3D Printer is short of a filament spool, you may want to clean the nozzles with compressed air or a specialized nozzle cleaner.
Filament spools can get jammed, too. To release a filament spool thats become jammed, first remove the filament from the spool and unwind it. Then, gently pull the filament up through the spool.
Check that any filament spool youre using isnt overfilled. If it isnt, the spool wont break or break unevenly when you remove it.
Unplug the 3D Printer before cleaning it, as moisture can cause corrosion or rust.
Use a lint-free cloth to wipe away dust and debris from any exposed circuit boards.
Air dry the 3D Printer after cleaning it.
If the 3D Printer is dusty, place a damp cloth on the printers exterior and spray it with a non-abrasive cleaning solution.
If the 3D Printer is dirty, spray it with a non-abrasive cleaning solution, then use a soft brush to scrub off any dirt or debris.
Wipe the 3D Printer down with a dry cloth after cleaning it.