Review JRUIAN Printer Accessories 1Pcs GT2 Pulley 20 with Teeth OR Without Teeth Idle Pulley 20Teeth Timing Gear Bore 5MM for GT2 Belt Width 10MM for 3D Printer 3D Printer Parts (Size : 20with Tooth B5

• Facebook
• Twitter
• Line

Details: JRUIAN Printer Accessories 1Pcs GT2 Pulley 20 with Teeth OR Without Teeth Idle Pulley 20Teeth Timing Gear Bore 5MM for GT2 Belt Width 10MM for 3D Printer 3D Printer Parts (Size : 20with Tooth B5

Brand: JRUIAN

Buyer Guide 3D Printer Parts & Accessories

 If you’re asking yourself, “What can I buy with a 3D printer?”, this guide is for you.

• Filaments. 3D printers require filament, which is a material that’s melted and extruded through a heated nozzle. Filaments come in many colors, and you can choose transparent, opaque, or metallic filaments.
• Tools. You definitely need a printer filament scraper, filament removal tool, and nozzle cleaning brushes.
• Studio furniture. A 3D printer desk is highly recommended, as it will allow you to have a proper surface to print on. You can also buy other furniture, including chairs, tables, shelves, and storage units.
• Software. Make sure your printer is compatible with the software you want to download. This will allow you to print 3D models from the comfort of your home or office.
• Documents. You’ll need a 3D modeling program that can create a 3D model of whatever you’d like to create.
• Other accessories. Buy a 3D printer enclosure, a 3D printer stand, and acrylic sheets.

How to choose 3D Printer Parts & Accessories

 If you’re shopping for a 3D printer, it’s important to consider which accessories you’ll want. Depending on which 3D printer model you choose, you may require different accessories. For example, if you’re buying a 3D printer with an extruder, you’ll need an extruder barrel, nozzle, and hot end (or tip).

• Heaters: Many 3D printers use a heated bed or a heated nozzle, or both. An extruder heater warms the extruder head, and a build plate heater heats the build plate.
• Fans: Some 3D printers come with dedicated fans that blow air through the printer or over the bed.
• Extruders: Some 3D printers come with an extruder — a device that takes filament and melts it, forming objects. When choosing a 3D printer, consider the type of filament it can use, the extruder type, and the extruder’s diameter.
• Build plates: Some 3D printers come with build plates, which are flat surfaces on which the printer can print.
• Software: Some 3D printers come with their own software. Each manufacturer has its own operating system. Try before you buy, and see if the software you’re interested in is compatible with your 3D printer model.

 

How to maintain 3D Printer Parts & Accessories

 Maintain your accessories to extend their life and get the most use out of them.

• Regularly clean your extruder. Most 3D printers come with an extruder, which is a metal tube that extrudes the plastic filament into the print bed.
• Clean your build plate. Build plates are the area where your 3D-printed model gets placed on. Some printers come with build plates that do not need to be cleaned, but some do. Regularly cleaning your build plate will extend the life of your build plate.
• Clean your heated bed. Heated beds are used to keep your 3D-printed models from warping. To keep them from warping, heated beds are typically coated with a non-stick coating. Regularly cleaning your heated bed will extend its life.
• Clean your cartridge. Cartridges are used to store filament, which is the plastic that your 3D printer uses to print your models.
• Regularly clean your nozzle. Nozzles are used by 3D printers to create small holes. To clean your nozzle, pour warm, soapy water into a bowl, dip your nozzle, and swirl it around in the soapy water until the nozzle is clean.

---

 

• Facebook
• Twitter
• Line