Review MakerPi 3D Printer DIY FDM Open Source 99% Pre-Assembled,Meanwell Power Supply,Nozzle Temp 260℃/500℉ Support PLA/ABS/PETG/Hips/PC,Bendable Bed 110℃/230℉,Build Volume 10.2x10.2x10.2inch

Page Contents

Details: MakerPi 3D Printer DIY FDM Open Source 99% Pre-Assembled,Meanwell Power Supply,Nozzle Temp 260℃/500℉ Support PLA/ABS/PETG/Hips/PC,Bendable Bed 110℃/230℉,Build Volume 10.2×10.2×10.2inch

Brand: MakerPi

Build Volume:10.23×10.23×10.23inch Larger build volume for more applications. Pre Assembly Only need to assemble the 4 screws on the shelf to work. Flexible Removable Magnetic Build Surface The flexible removable magnetic build surface makes it easy to take out the model. There is no need to take a shovel to separate the model from the platform when taking the model.Just gently bend the magnetic plate, and the model is easy to take out. Read more Printing 200H Without Failure Continuous printing for more than 200 hours,no fault,more stable in long-term use,more reliable. All Metal Machine Base 1.Inside power supply,safe to use. 2.All-metal base,printing more stably. Suitable Different 3d Printing Filaments Suitable for many different printing filaments,including PLAABSPCHIPSPETGetc.It is convenient for users to try different materials Read more 110 ℃ Hot Bed The hot bed temperature rises rapidly. It only takes about 2min and 30s for the hot bed temperature to rise to 70 ℃. Power Off Resume No worry about the power off,It can continue printing after power recover. Change Filament During Printing Filament can be changed during printing.If you don’t have many filaments left and you want to use up the remaining filaments. At this time,you can use the change filament function. When the filament is about to run out,Press one key to unload the filament and load the new filament.It can reduce the waste of filament. Read more Large Leveling Knob The leveling knob is larger and ergonomically designed.It can be adjusted as long as it is rotated gently.It feels better and more comfortable. Self-Developed Controller Board Using self-developed circuit boards,after continuous optimization and multiple tests,It is more stable for long-term use. Thermodynamic Design Heating Nozzle Structure The print head is designed through thermal analysis to completely isolate the hot end and cold end. Both the rapid temperature rise during heating and the cooling at the cold end are considered. Read more Picture Relief Printing As long as you have a well-defined picture,you can print the relief effect.This is a fun feature. Offline 3D Printing TF Card offline printing. USB Cable Transmission Gcode USB wire control transmission and printing,The machine and the computer are connected through a USB cable,the USB cable directly transmits the compiled code to the control board of the machine.Suitable for printing while working. Read more M1-Entry Level 3d Printer P2-Open Source 3d Printer K5 Plus-Office 3d Printer People Beginners of 3d Printers, Such As Children over the Age of 10 or Young Parents People Who Like Diy and Creation People Who Want More Professional,Stable and Safe 3d Printers, Companies,Schools and Other Institutions Application Various Small and Exquisite Models,Such As Small Toys Make All Kinds of Tools, Diy and Try Different Materials Easy Printing of Various Products,Hand Proofing in the Early Stage of R&D,School Teaching Advantages 1、one-button Printing: 2、auto-leveling Platform 3、magnetic Bending Platform 4、low Power Consumption 5、external Power Supply 6、portable 1、large Build Volume 2、easy to Install 3、magnetic Bending Platform 4、all-metal Base 5、support Pla/abs/petg/hips/pc 6、power off Resume 7、large Leveling Knob 1、280℃/536℉ Nozzle Temperature 2、snap on Quick Release 3、pla and Abs Filament Use Different Print Heads 4、guided Leveling 5、wifi 6、camera Monitoring 7、tmc2208 Slient Driver 8、led Lighting 9、laser Engraving 10、optional 0.2mm and 0.8mm Diameter Nozzles Build Volume 4*4*4inch（100*100*100mm） 10.2*10.2*10.2inch(260*260*260mm) 8x8x11.8inch(200*200*300mm) Material PLA PLA/ABS/PHA/HIPS/PETG/PA/PC/Short Carbon Fiber/Nylon,etc PLA/ABS/PHA/HIPS/PETG/PA/PC/Short Carbon Fiber/Nylon,etc Laser engraving mode × × Optional HD Camera and WIFI × × ✓ Silent Driver × × ✓ Power off Resume × × ✓ Filament Sensor × × ✓

Advantages

Products can be returned
Make sure this fits by entering your model number.
Larger Build Volume:We have made a lot of upgrades and modifications for this 3D printer machine, the most obvious of which is the larger size. You can print larger models directly. The build volume of this 3D printer machine is 260*260*260mmm (10.2*10.2*10.2in) and the diagonal length is 370mm (14.5in).
Support Many Materials:The nozzle temperature of this 3D printer machine can reach 260℃/500℉and the hot bed temperature can reach 110℃/230℉. The temperature can increase quickly. It takes only 2 minutes and 30 seconds to heat the hot bed to 70℃/160℉. Higher temperature nozzle and hot bed mean that the 3d printer can support more filaments including PLA/ABS/PETG/HIPS/PC. You can try more materials with different properties.
Good Printing Accuracy:To make a good 3D printer machine available, we can ensure that users can print good models when they get the 3D printer machine in three ways.1.The 3D printer machine has been debugged in the factory.2.We have reduced the assembly steps. Users only need to assemble the 4 screws on the shelf to print when they get the 3D printer machine. 3.We have designed a full sheet metal base to make it firmer, more stable and increase its printing accuracy.
7-Day Test:To guarantee the quality of the 3D printer machine, we have designed a 7-day quality control process. All assembled 3D printer machines need to receive 7 days of uninterrupted test to ensure that the 3D printer machines that users get can work normally.

Notice

Is an online purchase
Delivery may be delayed in some areas.

Buyer Guide 3D Printers

If you’re looking to buy a 3D Printer, read on. The following buying guide gives all the information you need to make a sound choice.

The 3 main printer types are desktop 3D printers, industrial 3D printers, and fused deposition modeling (FDM) printers.
Desktop 3D printers are cheap, easy to use, and quite affordable. They work well for small projects and are a great choice for home use.
Industrial 3D printers are versatile, reliable, and can handle larger heavier materials. They’re also the most expensive 3D printers.
FDM printers are the least expensive 3D printers. They’re best suited for hobbyists, students, and classrooms.
Most 3D printers are 3D scanners. You can use these devices to scan your ideas, objects, or designs, and then print them.
Printers have four main parts: the print bed, the extruder, the nozzle, and the motor.
Printers come in two main types: fused filament fabrication (FFF) and fused deposition modeling (FDM). FFF 3D printers use spools of filaments (plastic), while FDM 3D printers use thermoplastic (plastic) powder.

How to choose 3D Printers

Although 3D printers may be new to you, they’re actually already very commonplace.

3D Printers can take many forms. The most commonly used types of 3D printers are desktop printers, which are relatively small, and Industrial printers, which are larger and more powerful. Desktop 3D printers are less expensive and easier to use, but Industrial printers are generally sturdier and can take on larger jobs.
3D Printers use a variety of materials to print. The most common type of 3D printer uses plastic filament, which can be molded into a variety of shapes. Filament comes in a variety of colors and can be used to make a variety of objects, including smartphone cases, laptop cases, and toys.
3D Printers can be used for any purpose. Whether you want to make sculptures, furniture, or parts for your own do-it-yourself projects, 3D printers can help you create any 3D object you have in mind.
3D Printers are not a magic bullet. As with any new technology, 3D printers have pros and cons. While 3D printers are less expensive and easier to use than traditional manufacturing, they require special CAD software, which can cost thousands of dollars. 3D printers also dont offer the same range of materials, and cant create as many complex shapes as traditional manufacturing.
3D printers have advantages. If youre short on time or money, 3D printers can be a great solution, especially for small projects or limited budgets. 3D printing is also useful for prototyping and can help you quickly create and sell your own products.

How to maintain 3D Printers

3D printing is a remarkable way to create complex, functional objects. However, 3D printing is also incredibly time-consuming, complicated, and expensive.

Because of this, many 3D printers require regular maintenance. For instance, most 3D printers have a nozzle, which can get clogged with debris over time.

These clogs can slow down your prints, cause jams and errors, and ruin the quality of your 3D creations.

There are countless tutorials and guides on how to unclog a 3D printer’s nozzle. However, many of these guides require expensive replacement parts or professional equipment.

Luckily, there are several ways to clean your 3D printer’s nozzle without purchasing expensive replacement parts. Some of the most common ways to clean a 3D printer’s nozzle are: