Page Contents
Details: MECCANIXITY M6 Throat Tube, Extruder Brass Nozzle, Heater Block Hot End for 3D Printer 1.75mm Filament (with Hex Wrench) Pack of 5
Brand: MECCANIXITY
Advantages
- Products can be returned
- Make sure this fits by entering your model number.
- Throat Tube, Nozzle and Heater Block are 3D printer accessories, compatible with all 1.75mm ABS PLA 3D printers.
- Pack of 5 M6 Nozzle Throat Tube; Pack of 5 Print Head Nozzle(0.4mm); Pack of 5 Hot End Heater Blocks; Pack of 2 Hex Wrench(2mm/3mm Dia); Stainless Steel Throat Tube: Length: 30mm/1.18inch; Diameter: 6mm/0.23inch. Nozzle Length: 13mm/0.51inch; Diameter: 6mm/0.23inch. Heater Block Size: 20x20x10mm/0.78”x0.78”x0.4”(LxWxH).
- The throat tube is made of stainless steel, the nozzle is brass, the heater block is aluminum alloy. The nozzle of the extruder adopts a 0.4mm print head, the matching surface of it is smooth and the feeding is more convenient.
- Remove the upper part of the extruder, replace the old nozzle, throat tube and heater block, loosen the throat tube fixing nut, remove the throat tube, then install the new one, and tighten the fixing nut.
Notice
- Is an online purchase
- Delivery may be delayed in some areas.
Buyer Guide 3D Printer Parts & Accessories
If you are looking to purchase 3D printer accessories, here are a few tips that may help you narrow down your choice.- Type of printer. Many 3D printer accessories, such as 3D pens, are customizable. On the other hand, other accessories, such as filament spools, are not.
- Size. Filament spools come in various sizes, the main two are 1.75mm and 3mm.
- Material. Filament spools come in many materials, including PLA, ABS, or PVA.
- Computer. Some 3D printer accessories can be connected via USB, while others require a computer.
- Type. If you’re a beginner, you may want to consider a 3D printer kit.
- Features. Most 3D printer accessories come with basic features. However, you can find accessories with more advanced settings, such as the ability to print in colors or multiple materials.
How to choose 3D Printer Parts & Accessories
If you’re shopping for a 3D printer, it’s important to consider which accessories you’ll want. Depending on which 3D printer model you choose, you may require different accessories. For example, if you’re buying a 3D printer with an extruder, you’ll need an extruder barrel, nozzle, and hot end (or tip).- Heaters: Many 3D printers use a heated bed or a heated nozzle, or both. An extruder heater warms the extruder head, and a build plate heater heats the build plate.
- Fans: Some 3D printers come with dedicated fans that blow air through the printer or over the bed.
- Extruders: Some 3D printers come with an extruder a device that takes filament and melts it, forming objects. When choosing a 3D printer, consider the type of filament it can use, the extruder type, and the extruders diameter.
- Build plates: Some 3D printers come with build plates, which are flat surfaces on which the printer can print.
- Software: Some 3D printers come with their own software. Each manufacturer has its own operating system. Try before you buy, and see if the software you’re interested in is compatible with your 3D printer model.
How to maintain 3D Printer Parts & Accessories
Maintain your accessories to extend their life and get the most use out of them.- Regularly clean your extruder. Most 3D printers come with an extruder, which is a metal tube that extrudes the plastic filament into the print bed.
- Clean your build plate. Build plates are the area where your 3D-printed model gets placed on. Some printers come with build plates that do not need to be cleaned, but some do. Regularly cleaning your build plate will extend the life of your build plate.
- Clean your heated bed. Heated beds are used to keep your 3D-printed models from warping. To keep them from warping, heated beds are typically coated with a non-stick coating. Regularly cleaning your heated bed will extend its life.
- Clean your cartridge. Cartridges are used to store filament, which is the plastic that your 3D printer uses to print your models.
- Regularly clean your nozzle. Nozzles are used by 3D printers to create small holes. To clean your nozzle, pour warm, soapy water into a bowl, dip your nozzle, and swirl it around in the soapy water until the nozzle is clean.
Related posts:
Review Upgrade Double Sided PEI Spring Steel Sheet (Textured) Replaceable Magnetic Plate, 220/235/31...
Review Imdinnogo BCZAMD 3D Printer DIY Accessories 5 Meters/ 196.8in 8mm Flat Seal 4040 Aluminum Pro...
Review for Penbuilds Double Tee Nut M5,for OX CNC, 2020 for V-Slot Aluminum Profile 3D Printer Parts...
Review Nicfaky GT2-6mm Open Timing Belt X Axis 765mm+Y Axis 720mm Length Belt Replacement,for Ender ...