Review [Original]Anycubic I3 Mega 3D Printer Extruder Print Head

Page Contents

Details: [Original]Anycubic I3 Mega 3D Printer Extruder Print Head

Brand: ANYCUBIC

Advantages

Products can be returned
Make sure this fits by entering your model number.
Hotend for Anycubic i3 mega
0.4mm nozzle for 1.75 filament
12V 40W heater
V5 Radiator tube

Notice

Is an online purchase
Delivery may be delayed in some areas.

Buyer Guide 3D Printer Parts & Accessories

If you’re in the market for a 3D printer, you’ll need accessories. Here, I’ll cover what supplements you should look for, and how to select accessories based on your needs.

Filament. The filament is the material ejected from the extruder nozzle and deposited onto a build platform to build three-dimensional objects.
Build Plates. The build plate is a surface on which the printed object is built.
Heated Bed. The heated bed is a sheet of aluminum or glass that maintains a temperature that is appropriate for printing.
Extruder. The extruder is the nozzle from which the filament is ejected.
Vacuum Extruder. The vacuum extruder is a type of extruder that removes the air between the filament and the bed.
Print Bed. A print bed is a layer of material upon which to print.
Heated Bed. A heated bed is a bed of insulated aluminum or glass that maintains a temperature appropriate for printing.
Nozzle. The nozzle is the extrusion point from which the filament is ejected.
Extruder. The extruder is the nozzle from which the filament is ejected.
Vacuum Extruder. The vacuum extruder is a type of extruder that removes the air

How to choose 3D Printer Parts & Accessories

When it comes to choosing the best 3D printer accessories, customization is key.

Wireless printer: Wireless printers allow you to print up to 50 feet away from your 3D printer.
Filament: Filament is a type of plastic that can be melted down and extruded through a heated nozzle. Filament comes in a variety of different materials and colors.
Filament holder: Filament holders make it easy to store your filament and keep track of how full it is.
Multi-tool: A multi-tool is an essential addition to any 3D printer. Multi-tools allow you to remove and swap out filament cartridges, filament reels, and filament feed systems.
Nozzle cleaner: Nozzle cleaners are brushes that clean the nozzle of your 3D printer.
Magnetic sheet: Magnetic sheets are sheets of magnetic material that can be cut to size or placed over the bed of your 3D printer. A magnetic sheet helps the suction of open-cell printer foam, such as ABS, as well as creates magnets that can attach to the bed to keep your printer in place.
Heated bed: Heated beds are heated platforms that, when printed or placed on top of, create the material. A heated bed is important for printing objects that require a heated surface, such as ABS.
Nozzle kit: Nozzle kits are composed of several nozzles, which are the heating elements in your 3D printer.
Vacuum bags: Vacuum bags are bags that are sealed with vacuums and then opened. These bags can be used to store filament, or, if sealed, can be used to store parts or objects that need to be secured.
Vacuum bottle: Vacuum bottles are containers that can be sealed with vacuums and then opened. These bottles can store filament, or, if sealed, can be used too.

How to maintain 3D Printer Parts & Accessories

Maintaining your 3D printer accessories is important because if you don’t, you can end up causing damage to the printer itself.
When it comes to your 3D printer accessories, there are a few simple things you can do to keep them running smoothly:

Clean your filament: The filament you use for your 3D printer is incredibly important, and you need to clean it from time to time. If the filament gets dirty, it can cause problems when youre printing.
Clean your extruder: Your extruder is responsible for pulling the filament through the extruder nozzle and depositing the filament on the print bed. You can also clean your extruder by lubricating it.
Lubricate your filament: If your extruder is producing a lot of friction, you will need to lubricate it. One way to do this is by coating your filament in a thin layer of Vaseline.
Clean your heated bed: The heated bed is another vital part of 3D printing, and it needs to be cleaned regularly. When cleaning the heated bed, start by unplugging the printer. Then, use a paper towel to wipe off any debris from the bed.
Clean your print bed: To keep your print bed clean, use a paper towel to wipe down your print bed after each print.
Clean your nozzle: The nozzle, which pushes the filament through your extruder, can get clogged with debris. Use an eraser to clean it.
Clean the filament spool: Your filament spool can also get clogged with debris. You can clean it by soaking it in warm water and washing it.
Clean the filament feed chamber: To clean the filament feed chamber, unplug the extruder, remove the filament, and wash the chamber with soap and water.