Page Contents
Details: PARACAMISETAS 3D Printing Materials PA Nylon Filament 1.75mm 3D Printing Pen Filament Supplies 1kg Spool Neatly Wound 3D Printer Filament with Vacuum Packaging for FDM 3D Printer,Black
Brand: PARACAMISETAS
Silk Filament 1kg 1.75mm Filament for 3D Printer Full color Silk Fialment for DIY artwork printingSilk Filament Features:Environmentally friendly, non-toxic, biodegradable;Low shrinkagePrinting is smooth, and the surface of the finished product is smoother and more delicate;Suitable for all types of FDM3D printers, suitableCo-print crafts, artwork, industrial design samplesAnd product models with higher toughness requirements, etc.Product Parameter:Wire diameter: 1.75MMTolerance: ±0.02MMPrinting temperature: 200-230℃Bottom plate temperature: need to apply glue when not heatingHeating 60-80℃, no gluePull force (KGF): 6-8Melt index: 5-10g/10min (190℃, 2.16kg)Elongation at break: 200%Printing speed: 30-60MM/sAir bubbles: 100% zero bubblesNet weight: 1KG/rollGross weight: 1.4KG/rollLength: 1.75MM(1KG)=330MHow to Use:1. Open the package and take out the product;2. Install the product on the card slot of the printer for hanging the printing line;3. Put the head of the product onto the print head according to the requirements of the printer;4. Turn on the printer and start working.Package List:1 x 3D Printer Filament
Advantages
- Products can be returned
- Premium Quality Filament – The 3D Printing filament was neat on the roll and leaves the spool easily without any crossed turns. It produces the cleanest, least stringing prints of any of the filaments you have used whilst resisting warping and also providing the glossiest finish. Without a single jam and adhesion issue which meeting your demands for printing freely.
- Clog-free & Bubble-Free – Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. perfect 3D Printer Filament 1.75mm for smooth and stable 3D printing experience.
- Easy to Use: The filament 3d printing materials ensures that these filaments with a diameter of 1.75mm have a dimensional accuracy of +/- 0.03mm, 1 kg (2.2 lbs) per spool. The recommended printing temperature range is 185℃ to 230℃ (365℉‑464℉); Please remember to put it in time and keep it dry.
- Wide Compatibility – Made from starch raw materials derived from renewable plant resources, filament boasts lower melting temperature, even does not need a heated bed. Anycubic Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market.
- High-performance: Non-toxic and tasteless when printing, and it is not dangerous to people and the environment.
Notice
- Is an online purchase
- Delivery may be delayed in some areas.
Buyer Guide 3D Printing Supplies
It’s always a good idea to have a firm understanding of each individual component, and go from there.- Filament, or “muck.” The filament is a plastic used in 3D printing. It’s usually available in different diameters and colors.
- Printer. There are different kinds of 3D printers, including desktop, industrial, and open-source models.
- Software. There are several different types of printing software, including slicers, slicer-creator, and hosts.
- Support Material. Support material is a support material used in 3D printing. There are usually 2 types: soluble support material and solid support material
- PLA (Polylactic acid): PLA filament is biodegradable, renewable, and compostable.
- ABS (Acrylonitrile butadiene styrene): ABS filament is stronger, tougher, and better than PLA.
How to choose 3D Printing Supplies
When shopping for 3D Printing supplies, there are several factors that you should keep in mind:Is the 3D printer compatible with your
computer? Some 3D printers require special software, while others require
their own proprietary software. Some printers work with only Mac computers,
while others work with only Windows computers.
What materials will you use?
3D printers work with hundreds of materials, including polymers, metals,
porcelain, glass, and ceramics.
What are your needs?
Some 3D printers are better than others for specific types of uses. You
may want to look for a 3D printer that will handle small objects, large
objects, or both.
How much will you spend?
3D printers can cost thousands of dollars or a few hundred.
How large is the 3D printer?
3D printers come in all shapes and sizes. Some smaller printers work well
as desktop models, whereas bigger 3D printers can be used for large
spaces.
How large will your print be?
Some 3D printers can handle large prints, while some can only handle
small print jobs.
How fast will your 3D printer print?
3D printers are rated by how fast they print, and the speed will vary
depending on your needs. Some 3D printers print at a rate of several
inches per second, while others print at a rate of inches per hour.
Will you be printing outdoors or indoors?
Some 3D printers work best indoors, while others are best used outdoors.
How to maintain 3D Printing Supplies
3D printing is a new technology that is changing the way people create and engineer new products.- To clean the filament, use soap and water to wet your filament, then wipe it dry with a paper towel.
- To clean the nozzles, wipe them with a damp rag.
- To clean the build plate, wipe it with a clean, lint-free cloth.
- To clean the extruder, use compressed air.
- To clean the build plate, first, remove any building material or part from the plate. Then, use a paper towel or paper towel moistened with rubbing alcohol to wipe off the build plate.
- To clean the extruder, first, unplug the extruder from the 3D printer. Then, moisten a paper towel or paper towel with rubbing alcohol and wipe down the extruder.
- To clean the 3D printer, use compressed air to blow loose dust out of the printer.
- To clean the filament, use compressed air to blow loose dust out of the filament.
- To clean the nozzle, use compressed air to blow loose dust out of the nozzle.
- To clean the build plate, use compressed air to blow loose dust out of the build plate.
- To clean the extruder, use compressed air to blow loose dust out of the extruder.
- To clean the filament, unplug the extruder from the 3D printer and use compressed air to blow loose dust out of the filament.
- To clean the nozzle, unplug the nozzle from the 3D printer and use compressed air to blow loose dust out of the nozzle.
Related posts:
Review FARUTA 1.75mm Filament 0.5kg, PLA 3D Printing Filament 1.75mm high Precision, Suitable for 3D...
Review SCRIB3D P1 3D Printing Pen Starter Kit - Includes 3D Pen, 60 Meters PLA Filament, Stencil Boo...
Review SERUMY Aluminium PT100V6 Official Version Heat Block, for E3D V6 J-Head Extruder HotEnd Acces...
Review 101SANTEKI 3D Pen/3D Printer Filament 1.75mm PCL Filament Pack 10 Random Colors (10 Color)
