Review phrozen Sonic Mini 4K 3D Printer Bundle with Phrozne Onyx Rigid PRO410 3D Printing Resin 1KG

• Facebook
• Twitter
• Line

Details: phrozen Sonic Mini 4K 3D Printer Bundle with Phrozne Onyx Rigid PRO410 3D Printing Resin 1KG

Brand: phrozen

Phrozen Sonic Mini 4K 3D printer bundle with Phrozne Onyx Rigid pro410 resin (1kg).

Buyer Guide 3D Printers

 3D Printers offer users the ability to create physical objects from digital files. Buying the right 3D Printer can be a daunting task and this guide is here to help you make the right decision.

• Budget. Budget is the biggest factor that should guide your buying decision. While a low-end printer may suffice for most users, the difference in print quality between a low-end and a high-end printer may not be worth the added cost.
• Nozzle Size. Nozzle size determines the size of the nozzle tip. A larger nozzle tip prints finer details, but requires more time to print. The tradeoff is that printing a large object may require more material.
• Filament Diameter. The filament diameter determines the diameter of the extruded thread. The thinner the filament the better the resolution, but the larger the print. The bigger the print, the longer it takes to print.
• Print Speed. Print speed determines how fast the printer can print, measured in mm/s. Higher print speeds allow you to print larger objects in a short time.
• Nozzle Change Time. The nozzle change will determine how quickly you can replace a nozzle tip. Changing a nozzle tip with a slow change time means you need to wait for the printer to cool down before you can replace the nozzle tip.

 

How to choose 3D Printers

When shopping for a 3D printer, there are a couple of key factors to keep in mind:

• How easy is the 3D printer to use? Buying a 3D printer can be intimidating, particularly if you’re not familiar with how it works. When choosing a printer, look for one that has a clear instruction manual, as well as clear and detailed guides online. Also, consider whether the 3D printer comes with software or is compatible with other platforms.
• Does the 3D printer work right? 3D printers aren’t cheap. Before you buy a 3D printer, it’s important to test it out and make sure it works right. Most 3D printers come with either an SD card or a USB flash drive, so it’s a good idea to download and test the 3D printer’s software before committing to the purchase.

How to maintain 3D Printers

 Once you buy your 3D printer, you’re going to want to maintain it. As 3DPrint.com notes, there are a few steps you should take on a regular basis, including removing and cleaning the print bed, cleaning the printer, and regularly changing the filament.

• Remove and clean the print bed: The print bed is the part of the 3D printer that holds the filament as it is heated up and extruded into the 3D print. Regularly removing and cleaning the print bed can help your 3D printer last longer and help prevent print failure.
• Clean the printer: The most common issue people run into with their 3D printers is nozzle clogs. If your printer overheats, a clog may form in the nozzle. If you notice a clog, try cleaning it using a hot air blower. If you notice a clog in the nozzle, it may be necessary to replace the nozzle.
• Regularly change the filament: When you print with your 3D printer, you use filament. This can be messy, so it’s important to regularly clean the filament and change out the old filament with a new one.

 

---

 

• Facebook
• Twitter
• Line