Page Contents
Details: SainSmart INFI-20 Belt 3D Printer, Infinite Z Belt Printer with Textured Nylon Belt WiFi Printing Filament Break Sensor, for Cosplay Props Print Farm Batch Printing, 200mm×180mm×∞mm
Brand: SainSmart
With a print head tilted at 45 degrees and conveyor belt design, the 200mm×180mm×∞mm build volume INFI-20 is perfect for limitless long prints and non-stop batch printing, creating a smooth workflow for print farm and prop makers.
Advantages
- Products can be returned
- Make sure this fits by entering your model number.
- Infinite Printing: Print a model that is as long you want or print as many items as you need over and over. You are only limited by how much filament you have at your disposal.
- Easy Setup: The new batch of INFI-20 Belt 3D Printer is not fully assembled. But with an easy-assembly design and the built-in layer test feature, this belt printer will still get you off to an easy start.
- Stable CoreXY Structure: Precision Isosceles right-angle structure for rigidity and enhance print stability.
- Improved bed adhesion: Textured nylon conveyor belt on the INFI-20 delivers excellent print adhesion and smooth print quality.
Notice
- Is an online purchase
- Delivery may be delayed in some areas.
Buyer Guide 3D Printers
A 3D printer is a machine that allows you to create three-dimensional objects from a digital file or from a 3D model.- Price. The price ranges from $300 for an entry-level printer to $5,000 for an industrial printer.
- Print Speed. The print speed is the amount of time it takes to print a 3D object. The print speed varies with the printer model, but the average is 0.2 to 0.4 seconds per layer.
- Resolution. The resolution is the number of points per inch (PPI). The higher the resolution, the more detailed the 3D object will be. The higher the resolution, the more detailed the 3D object will be.
- Nozzle size. The nozzle size indicates the size of the nozzle used. The nozzle size on entry-level printers is 0.4 mm and goes to 0.3 mm on professional printers.
- Materials. There are many types of 3D prints. The most common is PLA, which is approved by the ABS standards.
- Filament. The filament is the material that goes into the nozzle of the printer. The filament comes in various colors and is typically sold in 1.75-gallon spools.
How to choose 3D Printers
When shopping for a 3D printer, there are a couple of key factors to keep in mind:- How easy is the 3D printer to use? Buying a 3D printer can be intimidating, particularly if you’re not familiar with how it works. When choosing a printer, look for one that has a clear instruction manual, as well as clear and detailed guides online. Also, consider whether the 3D printer comes with software or is compatible with other platforms.
- Does the 3D printer work right? 3D printers aren’t cheap. Before you buy a 3D printer, it’s important to test it out and make sure it works right. Most 3D printers come with either an SD card or a USB flash drive, so it’s a good idea to download and test the 3D printer’s software before committing to the purchase.
How to maintain 3D Printers
Once you buy your 3D printer, you’re going to want to maintain it. As 3DPrint.com notes, there are a few steps you should take on a regular basis, including removing and cleaning the print bed, cleaning the printer, and regularly changing the filament.- Remove and clean the print bed: The print bed is the part of the 3D printer that holds the filament as it is heated up and extruded into the 3D print. Regularly removing and cleaning the print bed can help your 3D printer last longer and help prevent print failure.
- Clean the printer: The most common issue people run into with their 3D printers is nozzle clogs. If your printer overheats, a clog may form in the nozzle. If you notice a clog, try cleaning it using a hot air blower. If you notice a clog in the nozzle, it may be necessary to replace the nozzle.
- Regularly change the filament: When you print with your 3D printer, you use filament. This can be messy, so it’s important to regularly clean the filament and change out the old filament with a new one.