Review TECBEARS 3D Printer Filament and Filament Dryer for 3D Printing, Remove Moisture from Filament, A Necessory Bundle to Improve Printing

Page Contents

Details: TECBEARS 3D Printer Filament and Filament Dryer for 3D Printing, Remove Moisture from Filament, A Necessory Bundle to Improve Printing

Brand: TECBEARS

Products can be returned
Make sure this fits by entering your model number.
【Wet Filament Saver】Still worry about the wet filament will ruin your 3D prints? TECBEARS filament dryer comes to help you end this situation. It tends to eliminate the build-up of moisture from the surface of the filament. So all your old materials can be brought back to life again.
【Wide Compatibility】Still struggling to find the one-for-all dryer? Take a look at TECBEARS filament dryer. With the Φ210*85(H)mm, this filament dryer box can be compatible with filaments of 1.75 mm, 2.85 mm, and even 3.00 mm comfortably. A simple solution to your filament switching problem.
【Easy to Operate】Confused by the complicated operation instructions? With a large touch screen, you can control the temperature and time on the TECBEARS filament dryer effortlessly. The timer goes up to 6 hours while the temperature ranges from 35°C to 70°C.
【Premium PLA Filament & Strong Bed Adhesion】TECBEARS has the advantages of high purity with low shrinkage and superb layer bonding, meeting your demands for different printing projects. Recommended Extrusion/Nozzle Temperature 190°C – 210°C, Bed 60°C – 80°C for better printing results.

Before purchasing your 3D printer, it’s important to know what to look for.

Consider your intended use. Will you be using a 3D printer for prototyping, making jigs, or making toys?
Consider your skill level. The printer you buy should be easy enough to operate.
Consider your printing requirements. Are you working with a CAD file that needs support or has overhangs?
Consider the material. Will your printer be able to print in ABS, PLA, nylon, or glass-filled nylon?
Consider the build volume. Will your printer be able to print in larger parts or in thinner layers?
Check the warranty.

Choosing 3D printing supplies requires a little bit of experimentation. However, there are a few things to keep in mind when shopping for materials:

The ABS plastic used in 3D-printed objects often has a bit of giving when it’s warm. This makes it ideal for producing small, fragile, or flexible objects.
PLA (polylactic acid) is a type of biodegradable plastic that’s commonly used by hobbyists and artists. PLA is edible and can be easily recycled after use.
Supports can be added to 3D printed objects, which help the 3D printed object stay upright during the printing process. Support material can be included in the print file, or removed manually afterward.

3D printing is a new technology that is changing the way people create and engineer new products.

To clean the filament, use soap and water to wet your filament, then wipe it dry with a paper towel.
To clean the nozzles, wipe them with a damp rag.
To clean the build plate, wipe it with a clean, lint-free cloth.
To clean the extruder, use compressed air.
To clean the build plate, first, remove any building material or part from the plate. Then, use a paper towel or paper towel moistened with rubbing alcohol to wipe off the build plate.
To clean the extruder, first, unplug the extruder from the 3D printer. Then, moisten a paper towel or paper towel with rubbing alcohol and wipe down the extruder.
To clean the 3D printer, use compressed air to blow loose dust out of the printer.
To clean the filament, use compressed air to blow loose dust out of the filament.
To clean the nozzle, use compressed air to blow loose dust out of the nozzle.
To clean the build plate, use compressed air to blow loose dust out of the build plate.
To clean the extruder, use compressed air to blow loose dust out of the extruder.
To clean the filament, unplug the extruder from the 3D printer and use compressed air to blow loose dust out of the filament.
To clean the nozzle, unplug the nozzle from the 3D printer and use compressed air to blow loose dust out of the nozzle.