Web Analytics

Review TECBEARS 3D Printer Filament and Filament Dryer for 3D Printing, Remove Moisture from Filament, A Necessory Bundle to Improve Printing

Page Contents

Details: TECBEARS 3D Printer Filament and Filament Dryer for 3D Printing, Remove Moisture from Filament, A Necessory Bundle to Improve Printing

Brand: TECBEARS

review TECBEARS 3D Printer Filament and Filament Dryer for 3D Printing, Remove Moisture from Filament, A Necessory Bundle to Improve Printing

Are you tired of facing dissatisfied 3D prints just because moisture cannot stop sticking to or seeping into your 3D printing filament? Don’t worry. TECBEARS filament dryer comes to help. With 2 heating sinks, this filament dryer box can effectively dry your filaments at their best status. And you can see significant differences in their before and after prints. The large-sized touch screen makes your drying operation easier. Whether you are a green hand or a 3D printer professional, it will be the right choice if you are looking for a filament dryer. Good-looking handicrafts cannot be divorced from high-quality materials. As the continuation of traditional handicrafts, delicate 3D prints cannot be without ideal status filaments. Find the dry box in your dream and make everything you want with your hands. Warm Tips for Better Use: 1. Please do not use this product in the bathroom, bathtub, wash basin, and other places where water is easy to contact. 2. When not using this product, please cut off the power supply to prevent sudden fire. 3. Before using, please make sure that you wind the filaments tightly so as not to scatter the filaments on the heating sheet due to high-temperature deformation. 4. When drying filaments, do not touch the heating plate in the box to avoid scalding. 5. When drying filaments, the upper cover of the drying box should be well covered to avoid heat loss. Specification: Product Size: 265(L) X274(W) X 118(H) mm Max. Capacity: φ210*85(H)mm Net Weight of Product: 980g Working Temperature: 35-70℃ LCD Screen Size: 3.43*2.87 inch

check price TECBEARS 3D Printer Filament and Filament Dryer for 3D Printing, Remove Moisture from Filament, A Necessory Bundle to Improve Printing

Advantages

  • Products can be returned
  • Make sure this fits by entering your model number.
  • 【Wet Filament Saver】Still worry about the wet filament will ruin your 3D prints? TECBEARS filament dryer comes to help you end this situation. It tends to eliminate the build-up of moisture from the surface of the filament. So all your old materials can be brought back to life again.
  • 【Wide Compatibility】Still struggling to find the one-for-all dryer? Take a look at TECBEARS filament dryer. With the Φ210*85(H)mm, this filament dryer box can be compatible with filaments of 1.75 mm, 2.85 mm, and even 3.00 mm comfortably. A simple solution to your filament switching problem.
  • 【Easy to Operate】Confused by the complicated operation instructions? With a large touch screen, you can control the temperature and time on the TECBEARS filament dryer effortlessly. The timer goes up to 6 hours while the temperature ranges from 35°C to 70°C.
  • 【Premium PLA Filament & Strong Bed Adhesion】TECBEARS has the advantages of high purity with low shrinkage and superb layer bonding, meeting your demands for different printing projects. Recommended Extrusion/Nozzle Temperature 190°C – 210°C, Bed 60°C – 80°C for better printing results.

Notice

  • Is an online purchase
  • Delivery may be delayed in some areas.

review TECBEARS 3D Printer Filament and Filament Dryer for 3D Printing, Remove Moisture from Filament, A Necessory Bundle to Improve Printing

review TECBEARS 3D Printer Filament and Filament Dryer for 3D Printing, Remove Moisture from Filament, A Necessory Bundle to Improve Printing

Buyer Guide 3D Printing Supplies

 When shopping for materials for your 3D printer, it’s important to do your homework. 3D printing isn’t cheap, so you’ll want to purchase the best supplies you can.

  • Consider the 3D printer. Some printers have certain materials that they work best with.
  • Consider the material. Some materials work better with certain printers.
  • Consider the extruder. Some printers work best with an extruder that is compatible with their materials.
  • Consider the PLA/ABS ratio. PLA and ABS have different melting points. Some printers work best with one type of material.

How to choose 3D Printing Supplies

 Choosing 3D printing supplies requires a little bit of experimentation. However, there are a few things to keep in mind when shopping for materials:

  • The ABS plastic used in 3D-printed objects often has a bit of giving when it’s warm. This makes it ideal for producing small, fragile, or flexible objects.
  • PLA (polylactic acid) is a type of biodegradable plastic that’s commonly used by hobbyists and artists. PLA is edible and can be easily recycled after use.
  • Supports can be added to 3D printed objects, which help the 3D printed object stay upright during the printing process. Support material can be included in the print file, or removed manually afterward.

How to maintain 3D Printing Supplies

 The 3D printer industry is one of the fastest-growing industries on the planet. Though 3D printers are relatively inexpensive, maintaining them can be an expensive task.

  • Use the right materials. As 3D Printing Supplies noted, different filaments are best suited for different printers, which is why it’s important to be aware of what type your printer needs.
  • Use the right temperature. As 3D Printing Supplies noted, 3D printers work best when kept at 110 to 115 degrees Fahrenheit.
  • Pay attention to cleaning. As 3D Printing Supplies noted, 3D printers come in a variety of materials, such as ABS, PLA, and PETG. These materials can build up—especially in small areas—especially when the printer is used frequently. Proper cleaning and maintenance can help you get the most out of your 3D printer.