Review YOUSU Silk PLA Filament 1.75mm 3D Printer Filament Coextrusion Filament Dual Color, Compatible with Most of 3D Printer, Silk Blue Green 1kg(2.2lbs).

Page Contents

Details: YOUSU Silk PLA Filament 1.75mm 3D Printer Filament Coextrusion Filament Dual Color, Compatible with Most of 3D Printer, Silk Blue Green 1kg(2.2lbs).

Brand: Yousu

Advantages

Products can be returned
Make sure this fits by entering your model number.
[Silk Magic PLA filament ] Yousu Coextrusion PLA filament, two color in the same filament. Perfect filament winding that compatible with the most FDM 3D printers.
[Shiny PLA filament] – Without polishing, you can get pearlescent & gorgeous printing surface. Unique based recipe assures less stringing and better overhang performance.
[No warping & Good Layer Bonding] – Excellent first layer adhesion to reduce warpage, shrinkage, curl and print failure. Good layer bonding strength make the printing parts stronger.
[Purity material & Precision Diameter ]- Full 1KG 3D printer filament reel, perfect roundness and 0.03mm diameter tolerance, good winding, avoid print failure jam or clog and making you a smoothly printing & better surface.

Notice

Is an online purchase
Delivery may be delayed in some areas.

Buyer Guide 3D Printing Supplies

When shopping for materials for your 3D printer, it’s important to do your homework. 3D printing isn’t cheap, so you’ll want to purchase the best supplies you can.

Consider the 3D printer. Some printers have certain materials that they work best with.
Consider the material. Some materials work better with certain printers.
Consider the extruder. Some printers work best with an extruder that is compatible with their materials.
Consider the PLA/ABS ratio. PLA and ABS have different melting points. Some printers work best with one type of material.

How to choose 3D Printing Supplies

When shopping for 3D Printing supplies, there are several factors that you should keep in mind:

Is the 3D printer compatible with your
computer? Some 3D printers require special software, while others require
their own proprietary software. Some printers work with only Mac computers,
while others work with only Windows computers.

What materials will you use?
3D printers work with hundreds of materials, including polymers, metals,
porcelain, glass, and ceramics.

What are your needs?
Some 3D printers are better than others for specific types of uses. You
may want to look for a 3D printer that will handle small objects, large
objects, or both.

How much will you spend?
3D printers can cost thousands of dollars or a few hundred.

How large is the 3D printer?
3D printers come in all shapes and sizes. Some smaller printers work well
as desktop models, whereas bigger 3D printers can be used for large
spaces.

How large will your print be?
Some 3D printers can handle large prints, while some can only handle
small print jobs.

How fast will your 3D printer print?
3D printers are rated by how fast they print, and the speed will vary
depending on your needs. Some 3D printers print at a rate of several
inches per second, while others print at a rate of inches per hour.

Will you be printing outdoors or indoors?
Some 3D printers work best indoors, while others are best used outdoors.

How to maintain 3D Printing Supplies

3D printing is a new technology that is changing the way people create and engineer new products.

To clean the filament, use soap and water to wet your filament, then wipe it dry with a paper towel.
To clean the nozzles, wipe them with a damp rag.
To clean the build plate, wipe it with a clean, lint-free cloth.
To clean the extruder, use compressed air.
To clean the build plate, first, remove any building material or part from the plate. Then, use a paper towel or paper towel moistened with rubbing alcohol to wipe off the build plate.
To clean the extruder, first, unplug the extruder from the 3D printer. Then, moisten a paper towel or paper towel with rubbing alcohol and wipe down the extruder.
To clean the 3D printer, use compressed air to blow loose dust out of the printer.
To clean the filament, use compressed air to blow loose dust out of the filament.
To clean the nozzle, use compressed air to blow loose dust out of the nozzle.
To clean the build plate, use compressed air to blow loose dust out of the build plate.
To clean the extruder, use compressed air to blow loose dust out of the extruder.
To clean the filament, unplug the extruder from the 3D printer and use compressed air to blow loose dust out of the filament.
To clean the nozzle, unplug the nozzle from the 3D printer and use compressed air to blow loose dust out of the nozzle.