Review ESP32 3D Printer Motherboard 32 Bit Control Board Kit 520Kb RAM 8192K Flash 3D Printer Parts

• Facebook
• Twitter
• Line

Details: ESP32 3D Printer Motherboard 32 Bit Control Board Kit 520Kb RAM 8192K Flash 3D Printer Parts

Brand: YWBL-WH

Buyer Guide 3D Printer Parts & Accessories

 If you are looking to purchase 3D printer accessories, here are a few tips that may help you narrow down your choice.

1.  Type of printer. Many 3D printer accessories, such as 3D pens, are customizable. On the other hand, other accessories, such as filament spools, are not.
2. Size. Filament spools come in various sizes, the main two are 1.75mm and 3mm.
3. Material. Filament spools come in many materials, including PLA, ABS, or PVA.
4. Computer. Some 3D printer accessories can be connected via USB, while others require a computer.
5. Type. If you’re a beginner, you may want to consider a 3D printer kit.
6. Features. Most 3D printer accessories come with basic features. However, you can find accessories with more advanced settings, such as the ability to print in colors or multiple materials.

How to choose 3D Printer Parts & Accessories

When shopping for your next 3D printer, it’s important to consider accessories that you might want to purchase.

• Filament spool: Filament spools are made for feeding filament into the extruder through a Bowden extruder. You can buy different sizes for different types of printers.
• Heated bed: Heated beds heat up a plate above the printing surface, creating a more stable surface for prints and keeping the plastic from warping. You can buy a DIY bed or a heated bed from a company like Ultimaker.
• Filament holder: Filament holders are made to hold filament securely in place. Buying a filament holder is a good option if you plan to make custom filament spools.
• Extruder: Extruders are made to melt and harden the plastic. When buying an extruder, consider which one will work best for your 3D printer.
• Nozzle: Nozzles are used to print with different thermoplastic materials. They control the amount of plastic that comes out and can be connected through a Bowden extruder.
• Build plate: Build plates are heated beds that hold the plastic while the printer prints.
• Bed leveling system: Bed leveling systems help the printer (or the Ultimaker 3 Extended) adjust the height of the bed so that it prints level.
• Nozzle heater: Nozzle heaters are used to melt filament in the extruder.
• Print bed heater: Print bed heaters warm up the printing surface.
• Fan: Fans are used to keeping the plastic cool as it prints.
• Cooling fan: Cooling fans are needed to keep the plastic cool as it prints.

How to maintain 3D Printer Parts & Accessories

 3D Printer accessories are multifarious and come in a wide range of shapes, sizes, and functions. These accessories can be very expensive, and it’s important to keep them clean, well-maintained, and in good working order. Here are some tips for maintaining 3D Printer accessories.

• If your 3D Printer isn’t operating properly, it’s possible that one of the accessories (e.g. a filament spool) has become damaged or clogged.
• The nozzles inside your 3D Printer can get clogged over time. If your 3D Printer is short of a filament spool, you may want to clean the nozzles with compressed air or a specialized nozzle cleaner.
• Filament spools can get jammed, too. To release a filament spool that’s become jammed, first remove the filament from the spool and unwind it. Then, gently pull the filament up through the spool.
• Check that any filament spool you’re using isn’t overfilled. If it isn’t, the spool won’t break or break unevenly when you remove it.
• Unplug the 3D Printer before cleaning it, as moisture can cause corrosion or rust.
• Use a lint-free cloth to wipe away dust and debris from any exposed circuit boards.
• Air dry the 3D Printer after cleaning it.
• If the 3D Printer is dusty, place a damp cloth on the printer’s exterior and spray it with a non-abrasive cleaning solution.
• If the 3D Printer is dirty, spray it with a non-abrasive cleaning solution, then use a soft brush to scrub off any dirt or debris.
• Wipe the 3D Printer down with a dry cloth after cleaning it.

 

---

 

• Facebook
• Twitter
• Line