Review Jinchao-Timing Pulley GT2 Aluminum Timing Pulley 16 Tooth 2GT 20 Teeth, Bore 4/5/6.35/8mm,Synchronous Wheels Gear Part for Width 6mm 3D Printers Parts Accuracy of Positioning

• Facebook
• Twitter
• Line

Details: Jinchao-Timing Pulley GT2 Aluminum Timing Pulley 16 Tooth 2GT 20 Teeth, Bore 4/5/6.35/8mm,Synchronous Wheels Gear Part for Width 6mm 3D Printers Parts Accuracy of Positioning

Brand: Pangocho

Buyer Guide 3D Printer Parts & Accessories

If you’re in the market for a 3D printer, you’ll need accessories. Here, I’ll cover what supplements you should look for, and how to select accessories based on your needs.

• Filament. The filament is the material ejected from the extruder nozzle and deposited onto a build platform to build three-dimensional objects.
• Build Plates. The build plate is a surface on which the printed object is built.
• Heated Bed. The heated bed is a sheet of aluminum or glass that maintains a temperature that is appropriate for printing.
• Extruder. The extruder is the nozzle from which the filament is ejected.
• Vacuum Extruder. The vacuum extruder is a type of extruder that removes the air between the filament and the bed.
• Print Bed. A print bed is a layer of material upon which to print.
• Heated Bed. A heated bed is a bed of insulated aluminum or glass that maintains a temperature appropriate for printing.
• Nozzle. The nozzle is the extrusion point from which the filament is ejected.
• Extruder. The extruder is the nozzle from which the filament is ejected.
• Vacuum Extruder. The vacuum extruder is a type of extruder that removes the air

How to choose 3D Printer Parts & Accessories

When shopping for your next 3D printer, it’s important to consider accessories that you might want to purchase.

• Filament spool: Filament spools are made for feeding filament into the extruder through a Bowden extruder. You can buy different sizes for different types of printers.
• Heated bed: Heated beds heat up a plate above the printing surface, creating a more stable surface for prints and keeping the plastic from warping. You can buy a DIY bed or a heated bed from a company like Ultimaker.
• Filament holder: Filament holders are made to hold filament securely in place. Buying a filament holder is a good option if you plan to make custom filament spools.
• Extruder: Extruders are made to melt and harden the plastic. When buying an extruder, consider which one will work best for your 3D printer.
• Nozzle: Nozzles are used to print with different thermoplastic materials. They control the amount of plastic that comes out and can be connected through a Bowden extruder.
• Build plate: Build plates are heated beds that hold the plastic while the printer prints.
• Bed leveling system: Bed leveling systems help the printer (or the Ultimaker 3 Extended) adjust the height of the bed so that it prints level.
• Nozzle heater: Nozzle heaters are used to melt filament in the extruder.
• Print bed heater: Print bed heaters warm up the printing surface.
• Fan: Fans are used to keeping the plastic cool as it prints.
• Cooling fan: Cooling fans are needed to keep the plastic cool as it prints.

How to maintain 3D Printer Parts & Accessories

Maintaining your 3D printer accessories is important because if you don’t, you can end up causing damage to the printer itself.
When it comes to your 3D printer accessories, there are a few simple things you can do to keep them running smoothly:

• Clean your filament: The filament you use for your 3D printer is incredibly important, and you need to clean it from time to time. If the filament gets dirty, it can cause problems when you’re printing.
• Clean your extruder: Your extruder is responsible for pulling the filament through the extruder nozzle and depositing the filament on the print bed. You can also clean your extruder by lubricating it.
• Lubricate your filament: If your extruder is producing a lot of friction, you will need to lubricate it. One way to do this is by coating your filament in a thin layer of Vaseline.
• Clean your heated bed: The heated bed is another vital part of 3D printing, and it needs to be cleaned regularly. When cleaning the heated bed, start by unplugging the printer. Then, use a paper towel to wipe off any debris from the bed.
• Clean your print bed: To keep your print bed clean, use a paper towel to wipe down your print bed after each print.
• Clean your nozzle: The nozzle, which pushes the filament through your extruder, can get clogged with debris. Use an eraser to clean it.
• Clean the filament spool: Your filament spool can also get clogged with debris. You can clean it by soaking it in warm water and washing it.
• Clean the filament feed chamber: To clean the filament feed chamber, unplug the extruder, remove the filament, and wash the chamber with soap and water.

---

 

• Facebook
• Twitter
• Line